Namron thermostat plug

[ChristS 0]

Anybody using the Namron thermostat wall plug with a Fibaro controller?

 

I have been trying hard to set it up with my Home Center LIte, and cannot get it to work.

 

Any advice would be welcome. Also, if anybody can recommend any other z-wave products to control electric heaters that would also be of interest.

[Fabir 64]

@ChristSHi I don't know the Namron thermostat wall plug.

 

According to their website there's also a zigbee thermo wall plug. The Fibaro Homecenter light, can only connect Zwave devices. Make sure you have the Zwave Version of the plug. Also the Zwave Region frequency has to be same as your homecenter. I assume in your case, the Europe Region.

 

You can also use the Fibaro

Please login or register to see this link.

together with a temp sensor like the Fibaro

Please login or register to see this link.

. Myself, I prefere devices with power supply to have more reliability. Like the Fibaro

Please login or register to see this link.

together with Temp sensors DS18B20 

[ChristS 0]

Thanks @Fabir. I have the z-wave version, and I have successfully added it as a device in my home center, that's not the problem. The problem is how to get it to follow a the schedule in a Heating Panel. I have also added two of the virtual devices as the Main Temperature Sensor and the Main Thermostat in the room I am trying to control. Still, the device does not follow the schedule set for the room.