I'm currently using HC2 version 4.144 and installed two heat controller. One with external temp module and one without it. After adding a heat controller I get two images, one of the heat controller itself and one thermometer. There are a couple of weird things:
1. The temperature of the heat controller with external temp module is correctly displayed by the thermometer image in the FibaroHome app (iOS), but is always displayed on the HC2 webpage as two dashes "--".
2. Th
@peterbazenI think Mr @I.Srodka said in his previous post, that temperature is displayed only if you have an external sensor. I can confirm this, I have both setups.
So:
- If you do not have a sensor, after ten minutes the thermometer should display --
- If you have a sensor, after 10 minutes it should give the temperature at the sensor site.