GreenWave node Flashing light

[swapsakker 0]

Now I got my GreenWave node working, but the there is this green light flashing. Is there any way to turn that off by using lua?

[stevenvd 51]

not via lua, but you should be able to set variable 1 to 128 or 255 to stop the blinking.

[HansS 3]

Hey, this is interesting. I have a couple of these devices, and they are all blinking indeed. Do you mean adding a parameter with number 1 and value 128? Do you set it on the main zwave device, or on any child device?

[SirMaggot 12]

I found this:

Parameter #1 (1 byte):

After how many minutes the GreenWave device should start flashing if the controller didn't communicate with this device (min: 1, max: 255)

Please login or register to see this link.

[sonnyboy 11]

Or you can set "polling to 50" on the master unit, andi it will stop blinking.

That worked for me

Tanks SirMaggot for this

[swapsakker 0]

Or you can set "polling to 50" on the master unit, andi it will stop blinking.

That worked for me

Tanks SirMaggot for this

Thanks. The polling 50 works

[HansS 3]

I added the parameter to the main zwave device, which causes it to appear on all the child devices as well. The blinking stopped, so it seems to work. Gonna see if it stays this way. Thanks

Please login or register to see this image.

/emoticons/default_wink.png" alt=";)" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" />

[stevenvd 51]

Tried further, 255 does not seem to work (only for a little time) and 128 seems to work... (mh one device now also blinks again). don't know

Please login or register to see this image.

/emoticons/default_tongue.png" alt=":P" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" />

indeed setting the time lower helps aswell, but after missing 1 update it will blink again.. and it increases the network traffic

[boerremk 83]

parameter 1 to 255

parameter 2 to 135

and it will not blink anymore (working for me).

[stevenvd 51]

for how long? worked for 24hours for me. Now blinking agian.

[boerremk 83]

for months

Please login or register to see this image.

/emoticons/default_smile.png" alt=":)" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" />

also added parameter 2?

[stevenvd 51]

no, but parameter 2 is just the representation of the color wheel. Turn it and the number will change

Please login or register to see this image.

/emoticons/default_wink.png" alt=";)" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" />

[akatar 207]

i gues:

param 1 255

and poll it once every hour

or if polling doesn't work

scene

every hour

if (first contact) is on

set it on

if off

set it off

so you have communication every hour and the led won't flash

or tape, these things cost 49 euro's and a piece of tape

Please login or register to see this image.

/emoticons/default_smile.png" alt=":)" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" />

[stevenvd 51]

Yeah, but I don't want to settle for ugly solutions

Please login or register to see this image.

/emoticons/default_smile.png" alt=":)" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" />

[akatar 207]

Yeah, but I don't want to settle for ugly solutions

Please login or register to see this image.

/emoticons/default_smile.png" alt=":)" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" />

makes me curious for you're wife

Please login or register to see this image.

/emoticons/default_smile.png" alt=":)" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" />

[stevenvd 51]

Same there

Please login or register to see this image.

/emoticons/default_wink.png" alt=";)" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" />

[swapsakker 0]

Or you can set "polling to 50" on the master unit, andi it will stop blinking.

That worked for me

Tanks SirMaggot for this

After a power down in the whole house, it is blinking again, so to change the polling does'nt work

Please login or register to see this image.

/emoticons/default_icon_sad.gif" alt=":-(" />

And agreen with "stevenvd" no ugly solutions. This is a great system and the nodes are great, so why ruin that with tape!!

[akatar 207]

Or you can set "polling to 50" on the master unit, andi it will stop blinking.

That worked for me

Tanks SirMaggot for this

After a power down in the whole house, it is blinking again, so to change the polling does'nt work

Please login or register to see this image.

/emoticons/default_icon_sad.gif" alt=":-(" />

And agreen with "stevenvd" no ugly solutions. This is a great system and the nodes are great, so why ruin that with tape!!

there was a smiley with my comment........

*something about humor is always limited to the person who reads it*

[stevenvd 51]

I just got a business idea... I will sell screw drivers so you can open them. with a special piece of plastic (tape) that you can use on the inside to cover the led

Please login or register to see this image.

/emoticons/default_wink.png" alt=";)" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" />

[akatar 207]

hmm,

i can sell the tape

let's work together!

we will rule the world!!

[SirMaggot 12]

Just click save on the device and it will stop blinking for a while.

Or, buy some tape

Please login or register to see this image.

/emoticons/default_smile.png" alt=":)" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" />