Hot to get Minimote and DUWI FB 10 working with HC2

[Hallamnet 17]

Hi all.

Still kinda new to the Fibaro system but slowly getting there.

Can anyone help me, or point me in the direction of a guide on how to setup the Aeon Labs Minimote and the DUWI FB 10 with the HC2

I have tried and tried and cannot get this working.

I am running the latest beta software 4.024

Any information or help would be great.

Thanks again,

Hal

[petergebruers 1,264]

I included a minimote under 4.023. It was difficult to include (it took 10 attempts). I can try it with 4.024 but not right now. What I can tell you is this... If you google minimote & fibaro, you are likely to find this procedure:

Please login or register to see this link.

- it is incorrect. You click 'learn' to include it, you don't hold it for 3 seconds. Do you know how to use sceneActivation?

[Hallamnet 17]

Hi there. I have managed to get the Minimote included but just do not no how to configure it to say, turn on lights or plug sockets.

I have never used scene activation.

So far, I have managed to setup some lights to come on with a Fibaro motion sensor and go off after a little while. That's about as advanced as I have got so far.

I bought the HC2 2nd hand with no manuals. It would be good to try and find an online manual to explain what all of the tick boxes and drop downs do.

If you can help out on any of these would be ace

Please login or register to see this image.

/emoticons/default_icon_smile.gif" alt=":-)" />

[petergebruers 1,264]

OK. To get you going... Try this script. Replace 9999 with the ID of your minimote (two times in this script) and 1111 with the ID of a plug or a relay...

Please login or register to see this code.

[Hallamnet 17]

Wicked. Thanks for this.

I will give this a go tomorrow night.

Will keep you updated.

Hal

Please login or register to see this image.

/emoticons/default_icon_smile.gif" alt=":-)" />

[ Added: 2015-01-05, 23:04 ]

Wicked. Thanks for this.

Just tried it and unfortunately this has not worked.

Followed everything through and it a no go.

Not too sure where i have gone wrong.

Thanks again,

Hal

[Guest Theck]

Hal,

I have the same issue. I never got the minimote to trigger a scene in 4.024 or 4.030.

Works fine though in earlier versions.

Another bug that needs urgent fixing.

Please login or register to see this image.

/emoticons/default_icon_wink.gif" alt=";-)" />

[JohanO 5]

Hal,

I have the same issue. I never got the minimote to trigger a scene in 4.024 or 4.030.

Works fine though in earlier versions.

Another bug that needs urgent fixing.

Please login or register to see this image.

/emoticons/default_icon_wink.gif" alt=";-)" />

Try setting parameter 250 to 1 by setting it to default and then save.

Wake up the minimote!

You have to visually see a confirmation that it's set to 1.

It took me a few times in 3.024 and it stil works.

[carmar74 4]

Hal,

I have the same issue. I never got the minimote to trigger a scene in 4.024 or 4.030.

Works fine though in earlier versions.

Another bug that needs urgent fixing.

Please login or register to see this image.

/emoticons/default_icon_wink.gif" alt=";-)" />

Try setting parameter 250 to 1 by setting it to default and then save.

Wake up the minimote!

You have to visually see a confirmation that it's set to 1.

It took me a few times in 3.024 and it stil works.

I know part of the Lua programming, know perfectly how to integrate a Minimote, but until the 3600 version works perfectly. With the new version 4030 do not accept the parameter 250-1. If there is a new procedure, do not have any idea

Please login or register to see this image.

/emoticons/default_icon_confused.gif" alt=":-?" />

Please login or register to see this image.

/emoticons/default_icon_rolleyes.gif" alt=":roll:" />

[celebioven 0]

Minimote is not working on version 4.030. That is one of the reasons why 4.030 sucks. It was working in Beta 4.022, I don't know what happened. I think it's because of the new zwave engine.

Please login or register to see this image.

/emoticons/default_icon_sad.gif" alt=":-(" />

[carmar74 4]

It's the reason why I returned back to the 3600 version.

I also have clients where they wanted in house Minimote.

You imagine what happens now .....

Please login or register to see this image.

/emoticons/default_icon_rolleyes.gif" alt=":roll:" />

Please login or register to see this image.

/emoticons/default_icon_rolleyes.gif" alt=":roll:" />

Please login or register to see this image.

/emoticons/default_icon_rolleyes.gif" alt=":roll:" />

[JohanO 5]

I think i also got minimote working in 4.022.

You could include it in other versions but it did not accept parameter 250.

I never got my 2 Zwave-me Key Fob's working again.

You can include them but you can't even see them in a block scene, they are visible in "Other Devices" but they don't work. (V4.30 STABLE)