Avoid roller shutters opening if alarm is present

[TheItalianJob 12]

I've a fibaro universal sensor that transmit  "Frame ALARM GENERIC" to fibaro roller shutters in case of wind and rain (I've an anemometer and rain sensor), and the alarm cancellation are set to 3600 seconds.

These features made with associations help me to close the sun awnings in case of rain and wind without the use of controller (HC2 or HCL)...

But now I need another feature that avoid "accidental" open requests (through scenes or press buttons) in case of alarms are still active...

I'm sure exist a way through parameters of devices to resolve my question but I need an expert help...

 

Can I avoid the awning opening (through push button or automated scene) if associated alarm is active?

[Wegerhoff 6]

For roller shutters there is a setting "Local protection state". If it is set to "No operation possible" in the web interface, then it is not possible at all to control a device directly via buttons. Same is available to block operation via scenes: If "Remote protection state" is set to "No remote control".

 

However, my roller shutter module does not store that value, when changed in the web interface, but always is set back to "unprotected".

 

The state can be read by this command:

Please login or register to see this code.

If there also was a command to set this parameter via LUA, then if was your solution. But I can't find one.

 

[Wegerhoff 6]

Here is how to enable and disable the protection state of roller shutter module, means disable or enable the control by keys or scenes: 

 

This script sets the localProtectionState and RFProtectionState from inside a scene via Fibaro Home Center Restful API call, as referred to at

Please login or register to see this link.

 as setProtectionLocalAndRF.

 

 

Please login or register to see this code.

 

 

 

 

[JMDFIB 1]

je cherche a comprendre comment fonctionne les arguments.

 

I am trying to understand how the arguments wo

 

Avez-vous d'autres exemples, ou pourrai-je trouver des exemples ?

Please login or register to see this code.

 

actionName...

body....