Frost protection water pipe

[smarthytte 0]

How can I set up the Fibaro system to frost protect a water pipe? I want to turn on Fibaro wall plug when the temperature is -1 degrees C and off on 0 degrees C automatically to control the heating cable.

I have an outdoor temperature sensor.

Heating panel could solve this but settings only goes to +4 degrees

Any suggestions?

[Reinhold 18]

You can make a block scene for this.

 

 

Please login or register to see this attachment.

Edited January 13, 2019 by Reinhold

[Milan Takacs 22]

something like this

you can make it more nice, but it should work

 

Please login or register to see this code.

 

[Reinhold 18]

@Milan Takacs

He have a lits he can't make lua scenes 

[Milan Takacs 22]

Sorry, didn't seen...

Then 2 scene... on for turn on, and one for turn off...

You right @Reinhold

[Reinhold 18]

You are right he must make 2 scenes. 1 for on and 1 for off. You can't use else in a block scene. 

Edited January 13, 2019 by Reinhold

[smarthytte 0]

Thanks for help, I had tried this before but used "and" instead of "then"

I have made 2 scenes now which run automaticly, on and of, hope they will work:

 

Please login or register to see this image.

/monthly_2019_01/image.png.7ce59484506578f25cdfd06a3818392a.png" alt="image.png.7ce59484506578f25cdfd06a3818392a.png" />

 

[Reinhold 18]

This must work.

[smarthytte 0]

Hi, I have another question on this post, I want to receive a notication  one time when the temperature is under -1 and heating cable switch on, I have set up notification but it send notifications all the time, every few minutes. Is this wrongly set up or will not work or do I have to do something on my mobile to stop the notification after the first one?

 

Please login or register to see this image.

/monthly_2019_01/image.png.45653c08dbb13fd9d1664bb93f87e7e2.png" alt="image.png.45653c08dbb13fd9d1664bb93f87e7e2.png" />