Looking for WiFi switch module for HC2

[TightPants 0]

Hi there,

 

Looking for a WiFi equivalent to a Fibaro Single and Double Switch, that can be triggered from HC2. I'm not an expert on scripts or Virtual Devices so the simpler the better ! ... I've seen on Amazon - Sonoff, Moes, Loratap and there are lots of others. Need the ability to work easily out the box with Alexa too.

 

Anybody any have any experience or recommendations ?

 

Thanks in advance.

[cag014 628]

What about Fibaro's homekit switch, is WiFi

[TightPants 0]

12 hours ago, cag014 said:

What about Fibaro's homekit switch, is WiFi

Thanks but I thought the Fibaro Homekit switch as was 2.4Ghz Bluetooth ? -

 

Power supply:	100-240V AC, 50/60 Hz
Supported load types:	Resistive and incandescent
Rated load current:	8A - continuous load
Operating temperature:	0-35°C (32-95°F)
For installation in boxes:	Ø ≥ 50mm, depth ≥ 60mm
Overcurrent protection:	required external 10A circuit breaker
Radio protocol:	Bluetooth® low energy
Radio signal power:	EIRP up to 10dBm
Radio frequency:	2.4 GHz
Radio transmit power:	up to 10 dBm (EIRP)
EU directives compliance:	RED 2014/53/EU RoHS 2011/65/EU
Dimensions (L x W x H):	42.5 x 38 x 20.4 mm

[cag014 628]

See below marked red   Power supply:	230V AC, 50 Hz
Rated load current:	10A - continuous load
Power output (for resistive load):	2300W - continuous load
To be used with E or F type (Schuko) sockets:	- CEE 7/16 - max load 2.5A - CEE 7/17 - max load 10A - Dual type plugs E/F
EU directives compliance:	RED 2014/53/EU RoHS 2011/65/EU
Pollution Degree:	2 (home and office use, indoor only)
Radio protocol:	IEEE 802.11n Bluetooth® low energy
Radio frequency:	2.4 GHz
Radio transmit power (EIRP):	up to 15 dBm (Wi-Fi) up to 9.2 dBm (BLE)
Operating temperature:	0-40°C (32-104°F)
Temperature measuring range:	0-40°C (32-104°F)
Dimensions (diameter x height):	43 x 65 mm (1.7" x 2.56")

Safety classification rating: home and office use only

Type 1 action according to features of automatic action as per clause 6.4.1 of EN 60730-1:2012 standard.
Software class A device, according to EN 60730-1:2012 standard.

[TightPants 0]

On 11/15/2019 at 1:10 PM, cag014 said:

See below marked red   Power supply:	230V AC, 50 Hz
Rated load current:	10A - continuous load
Power output (for resistive load):	2300W - continuous load
To be used with E or F type (Schuko) sockets:	- CEE 7/16 - max load 2.5A - CEE 7/17 - max load 10A - Dual type plugs E/F
EU directives compliance:	RED 2014/53/EU RoHS 2011/65/EU
Pollution Degree:	2 (home and office use, indoor only)
Radio protocol:	IEEE 802.11n Bluetooth® low energy
Radio frequency:	2.4 GHz
Radio transmit power (EIRP):	up to 15 dBm (Wi-Fi) up to 9.2 dBm (BLE)
Operating temperature:	0-40°C (32-104°F)
Temperature measuring range:	0-40°C (32-104°F)
Dimensions (diameter x height):	43 x 65 mm (1.7" x 2.56")

Safety classification rating: home and office use only

Type 1 action according to features of automatic action as per clause 6.4.1 of EN 60730-1:2012 standard.
Software class A device, according to EN 60730-1:2012 standard.

 

Can you post the link to that spec please, thanks ... only spec I can find with wifi is the wall plug not switch module

Edited November 17, 2019 by TightPants

[cag014 628]

Sorry... my mistake it is wall-plug

Please login or register to see this link.

May be this will fit your needs

Please login or register to see this link.

 

 

Edited November 18, 2019 by cag014