Welcome to Smart Home Forum by FIBARO
Search the Community
Showing results for tags 'spriklers'.
191 downloads1. Adjust Watering Scene Features: adjusts watering time sends email/push about watering conditions saves historical watering conditions This scene allows you to adjust watering time based on current rain forecast rain (till noon) current temperature forcast temperature You can change watering conditions as you like in adjustWatering() function. For example: if current rain >= 1 mm then turn off watering for 24h if forecast rain >= 2 mm then turn off watering for 24h if current rain >= 0.5 mm then decrease watering duration by 30% if current temperature >= 30°C then increase watering duration by 40% if current temperature <= 1°C then turn off watering for 24h if forecast temperature <= 1°C then send warning about frost The scene requires Sankotronic's 'Weather State and Forecast VD'. Tested with "Weather State and Forecast v2.7.1 standalone" Supports almost all services supported by 'Weather State and Forecast VD': OpenWeatherMap (only daily version) Dark Sky WeatherBit Weather HERE You can change it as always at Sankotronic's 'Weather State VD'. Customization: local vdID = 476 -- ID of 'Weather State VD' from which we will take data local sendEmail = true -- change to false if you don't want to receive emails local sendPush = true -- change to false if you don't want to receive push messages local emailUserId = 2 -- user id to send emails local pushDeviceId = 0 -- mobile device id to send push messages Watering schedule should be set in sprinkler panel. I scheduled running this scene everyday 15 minutes before planned start of irrigation. The scene increases/decreases watering time of all sprinklers. Optional modules: 2. Watering History VD Features: shows watering time for the last 7 days shows watering conditions for the last 7 days (gathered by Adjust Watering Scene) shows current watering state (on/off) shows current watering mode (auto/manual) shows watering plan allows to change watering mode (auto/off) allows to run watering once (15/30/60 min) Customization: buttons code: local sprinklerNr = 1 -- sprinkler number (1, 2, 3, ...) VD supports only one sprinkler. If you want to see the watering history of more sprinklers then you have to create separete VD for every sprinkler. Remember to set sprinklerNr variable for every of them. 3. Netatmo Scene If you don't have your own Netatmo Station, then you can use the neareast station in your location. All public stations you can check here: https://weathermap.netatmo.com The rain data from the netatmo are much better than the data from Forecast Weather Service. Especially if the rain Netatmo station is near your location. All you need is: a) copy the code from Netatmo.lua and paste it into Sankotronic's 'SA_Weather_Module_scene' at the end of file b) sign up to get access data (https://auth.netatmo.com) and fill these fields in pasted Netatmo Scene code. Client ID and Client Secret token you can get when you create app on site https://dev.netatmo.com/apps/ local n_client_id = "" local n_client_secret = "" local n_username = "" local n_password = "" c) then change these variables values in the main loop of Sankotronic's 'Weather State VD' as follows: local netatmoWeather = true local netatmoRain = true d) if Sankotronic's 'Weather State VD' doesn't show netatmo values then increase distance to find a rain gauge in pasted Netatmo Scene code: local long_lat_adjust = 0.1 Enjoy...
Hello forum, I'm a newbie to Fibaro but not home automation (have been using X10 for some years and recently tried Insteon which I thought was a complete disaster!) I am now building up my Z-WAVE network and started with a Fibaro Home Center 2 and some Motion sensors, Wall Plugs, etc. One of the things I would like to be able to organise if automatic watering of my lawns. I currently use a normal watering computer but I am toying with the idea of using the HC2 to control that and have seen several articles on that, looks ok. I also recently bought a full Netatmo set (Indoor and outdoor sensors, wind sensor and rain sensor). I would love to be able to grab the readings from these sensors to drive the sprinklers. How do I do that? Am I going to have to learn LUA and create Virtual Devices to achieve that? Appreciate all and any feedback and advice! Regards