Problem with Danfoss Living connect Thermostat

[Lauri 6]

Hi, I am having trouble assigning the danfoss thermostat to Fibaro HC2. How can I get this to work with HC2? I switch the HC2 in learning mode and click 3times danfoss button (i have tried all of them) and HC2 do not recognize thermostat.

Help please!

[damo78 0]

I seem to remember only holding the middle button down whilst the HC2 was in learning mode and it picked it up immediately. From memory, the Danfoss LED changed so I knew I'd held it down correctly, and literally as soon as the HC2 went into learning mode it found the device.

If you're still having trouble let me know and I'll re-trace my steps properly.

[Lauri 6]

Hi, just tried again, and nothing happend. Only the thermostat started to operate open/close.

[Guest KubaW]

Please login or register to see this link.

(go to 2:23)

[Lauri 6]

It seems that my thermostat is not communicating this way. I will try to replace this and have another try.

Thanks for the help!

[K.Bergmann 2]

Dear Sir!

Maybe try to firstly remove thermostat from the system -> Devices -> Delete Device, then add device (please press only once button in the middle (look into the danfoss manual). It should work fine.