HRT4 and Danfoss togheter

[pewi 1]

Hi

Hope some one can help me

I would like to be able to change the temp with HRT4 so it regulates the danfoss thermostat

First Have added HRT4 in HC2 (OK)

2nd I added a danfoss thermostat (OK)

What do I need to do to set value on HRT4 be transferred to danfoss thermostat

I have tried to create "Linked Units - Heat" but it can not connect any devices?

I have created a heating panel "toilet" but it can not connect any device?

What do I need to do to make it work

Regards / / Per-Anders W

[ Added: 2013-03-08, 16:52 ]

Be able to Controll danfoss valve with Horstmann HRT4-ZW

Can I do it with a scene ? or

Please

BR

[robmac 173]

I do it like this

Please login or register to see this code.

but you should also be able to set association to the valves using group 4 or 5 but I have not managed to get this working reliably yet

edit: had another go and it looks like it is associated but no luck. I think the issue is that the danfoss valve is designed to work with the danfoss controller and does not play nicely with HRT4 or HC2/Vera/Homeseer come to that. I guess the reports are not compatible? Group 1 also looks odd now. Going to live with the scene.

Please login or register to see this attachment.

[stevenvd 51]

Wow, I think there is a little bug somewhere....

When I run your code (with different Id's) my HC2 crashes directly. I get a 503 page and have to reset the HC2.

Worst crash in a while...

[ Added: 2014-01-23, 09:24 ]

mhh. Robmac What id do you have in the top of your scene? it's not the device ID, as that is ID 61. and you use 57...

[ Added: 2014-01-23, 09:30 ]

oke, Had one ID wrong which made the HC2 crash

Please login or register to see this image.

/emoticons/default_wink.png" alt=";)" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" />

I was reading the actual value from a device that does not exist...

Made a little change to also set the time:

Please login or register to see this code.

[robmac 173]

Two things you could get wrong

change the value of the device that triggers the scene from in the scene...you would get a big problem unless you control the instances.

set value on an id that does not exist

hope you have spotted the mistake

[stevenvd 51]

Yeah, I was reading the value from id 57

Please login or register to see this image.

/emoticons/default_tongue.png" alt=":P" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" /> forgot to change it

Please login or register to see this image.

/emoticons/default_wink.png" alt=";)" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" /> and that device did not exist. so got it working now

Please login or register to see this image.

/emoticons/default_smile.png" alt=":)" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" /> thanks!