AEON LABS Energy meter e Smart Switch

[brupa 0]

Good evening, I use Fibaro HC2 with various devices including, DSC0616-ZWEU and DSB09104-ZWXX, the Home Energy Meter both the aeon labs, I would like to know how to set the parameters for you to send me a reading of the energy used in kilowatt say at least every 30 seconds, the Aeon Labs sent me the parameters, but I actually prefer to entrust to You

As rigurda "DSB09104-ZWXX, the Home Energy Meter" he adds two icons, and the measurements differ by a few hundred watts. Considering the wonderful work you are doing, I could really use your help to ensure that such equipment can give their best working with HC2.

Thanks in advance for your cooperation.

Bruno Pagnoni

[Guest jrkalf]

Hi Bruno,

Sadly Fibaro has some templates for certain devices, and when a template is loaded, manual configuration isn't allowed.

The best thing to do (which is what I do for each beta update as well), is to go to

Please login or register to see this link.

and file a bug about the template not being correct and send them the pdf of the device so they can read through the PDF and set the right parameters in the template.

Z-wave is a standard protocol, so all they need to have is the parameters and the command sets so they know how to talk to the device.

Jelle