TEMPERATUE SETTING FOR ROOM

[tomek88zg 0]

greetings,

i have one question about how set the room temperature directly through hc2 interface.

not through the heating/ac panel.

do i need a termostat for this kind of setting?

thanks

[robmac 173]

You do not need a thermostat as you can use a thermometer and scenes.

Fibaro universal sensor supports 4 thermometers and there are other devices on the market that provide temperature. I use a couple to check my water tanks are not about to freeze.

You can then use scenes to control your heaters or aircon when the thermometer reading is above or below a target temp.

Please login or register to see this attachment.

[lucschell 0]

Robmac;

how do you activate a scene with a temperature sensor/value?

thnx!

[christos 9]

+1

[robmac 173]

Hi,

For the temp sensors on the universal sensor, use the value property to trigger the scene like you would for any other device property.

167 is the device id for one of my temp sensors so for me.

Please login or register to see this code.

at the top

and remember to convert the value from text to number to compare to your threshold

in any if statement

Please login or register to see this code.

hope that helps.

[prats6989 0]

robmac, am trying to activate a scene using fibaro motion sensor's temperature..it is not activating..please refer this (

Please login or register to see this link.

) and suggest something