Motorised Gate

[alijanah 1]

Hi !

I have a motorised sliding gate which is triggered by a single push button momentary switch. A single push will open the gate until it opens up fully. Another single click will close the gate until it closes fully. If I click the button during the gate is opening or closing, it will stop the gate.

Do I use the roller shutter module or the relay module to automate this into my HC2 ?

Thanks.

[mpatel0902 0]

Relay module will also work.

[Guest Kuuno]

i use 3kw relay but will test rolle rshutter, because getting the position is good sometimes...

[alijanah 1]

Thanks for the replies guys. Can you share your wiring schematic please ? Thanks.

[Guest Lode]

I use a 3 kw switch.

This is how to wire up

You can do even more........

When somebody uses the remote control that belongs to your motor HC2 never knows wether your gate is closed or not.

So i attached a magnetic sensor to my gate wich is connected with a universal sensor.

So you can even generatie an alarm if somebody tries to force open your gate or closing the gate automatically at a certain time, mine closes always at 22.30.

Please login or register to see this link.

If you more info just ask...

Please login or register to see this image.

/emoticons/default_icon_biggrin.gif" alt=":-D" />

Please login or register to see this attachment.

[alijanah 1]

Thank you very much. I will study this and try it out. Cheers !

[ Added: 2014-02-19, 14:09 ]

Just to double check, I don't see any connection to S1 or S2. Where do you connect your physical switch to?

I use a 3 kw switch.

This is how to wire up

You can do even more........

When somebody uses the remote control that belongs to your motor HC2 never knows wether your gate is closed or not.

So i attached a magnetic sensor to my gate wich is connected with a universal sensor.

So you can even generatie an alarm if somebody tries to force open your gate or closing the gate automatically at a certain time, mine closes always at 22.30.

Please login or register to see this link.

If you more info just ask...

Please login or register to see this image.

/emoticons/default_icon_biggrin.gif" alt=":-D" />

[Guest Lode]

Thank you very much. I will study this and try it out. Cheers !

[ Added: 2014-02-19, 14:09 ]

Just to double check, I don't see any connection to S1 or S2. Where do you connect your physical switch to?

I use a 3 kw switch.

This is how to wire up

You can do even more........

When somebody uses the remote control that belongs to your motor HC2 never knows wether your gate is closed or not.

So i attached a magnetic sensor to my gate wich is connected with a universal sensor.

So you can even generatie an alarm if somebody tries to force open your gate or closing the gate automatically at a certain time, mine closes always at 22.30.

Please login or register to see this link.

If you more info just ask...

Please login or register to see this image.

/emoticons/default_icon_biggrin.gif" alt=":-D" />

I don't use a physical switch but if you are it's just the same.

Just power up your switch, you don't need S1 or S2 because it's an N/O contact.