Update 3.590

[A.Socha 133]

WARNING! In case of update from old version, v1.x, after that update all users will be deleted. Admin password will be reset. Also all devices will be automatically reconfigured to work with new system architecture. Reconfiguration progress will be shown in pop-up window.

This update can last longer than previous. If this update lasts longer than 30 minutes, please go to main HC2 address (e.g. 192.168.0.1).

If "System temporarily unavailable" text will appear during update, please wait - you will be redirected to the main page when all services start.

Mobile apps fully working with this version:

- iPhone app - version 2.1.1 (available on the App Store),

- Android phones app - version 1.3 (available on the Google Play),

- iPad app - version 1.2 (available on the App Store).

3.590

- Optimized for remote access activities.

- Support for Fibaro Motion Sensor.

- Fibaro Alarm minor fixes.

- Gateway Connections improvements.

- Z-Wave engine improvements.

- Other minor bug fixes.

3.580

- Testing connection with Satel alarm.

- Faster HC2 booting.

- "Undo" button after predefined alarm scene has started.

- PIN codes added to alarm (warning: PIN code will be reset after this update and has to be set up again).

- Information from Fibaro icon added.

- Entry time and exit time in Fibaro Alarm.

- Excluding sensors from alarm system.

- Excluding devices from events history.

- Possibility of setting sensor as always armed or always disarmed.

- Changes dedicated to mobile apps new versions.

- Importing gateways - information about connected gateways.

- Possibility to change temperarure unit.

- Importing / exporting virtual devices.

- Network settings fixes.

- Virtual devices changes and fixes.

- RGBW device fixes.

- Backups creating fixes.

- Virtual devices update - sleep in main loop increased to 3 seconds.

- Fibaro Alarm fixes and changes (i.e. always armed / always disarmed, multi arming / multi disarming devices, excluding sensors from alarm system, configuring sensors).

- Stopping scenes and blocking saving scenes and devices while alarm is active.

- Fixed searching for other HC2 units in local network.

- Other minor bug fixes.

Bugtracker tickets:

- 0000077: Logi

- 0000141: Włączanie alarmu z iOS

- 0000398: Error uploading .png icons

- 0000413: HC2 show me 0.01 W usage for one fibaro dimmer Turned OFF !

- 0000414: HC2 show me 0 W usage for one fibaro 3k switch Turned ON but 10W declared !

- 0000522: In API field "type" appears twice in properties node, sensor, binary light etc.

- 0000531: Show the scene in interfaces changed to "No" without notification -> scenes not visible in Iphone & Android app.

- 0000585: Device Declared power consumption does not work sometimes

- 0000631: 3.548 json.encode crashes in virtual device

- 0000723: 'modified' field in /api/devices is not updated with new timestamp after device state changed

- 0000742: Add delayed trigger to alarm panel

- 0000757: Extra options for "device kind"

- 0000942: Alarm Panel Problems

[robmac 173]

Gone through all my test scripts and everything is working.

Great release.

[stevenvd 51]

seems good

Please login or register to see this image.

/emoticons/default_smile.png" alt=":)" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" />

[rvorsten 0]

All fine and dandy here! 5 minutes only, going form 3.582 to 3.590.

Thanks guys! Next is v4 now!

Ronald

[hvb83 1]

Upgrade went fine here; within a couple of minutes, no errors spotted so far.

[rantta 2]

No problems here.

[Kage 37]

Nice, and between 3 and 5 min, no problems here

Please login or register to see this image.

/emoticons/default_laugh.png" alt=":lol:" />

[ivan.ruban 3]

Version works stable so far

[mitos6183 0]

hello

update install without problem, thank you

[Ucciogenerale 2]

Everything is working properly, fast update, no problem at all!

[Guest shapa]

After multiple reboots, it is stable (more or less) now.

[GlennNZ 0]

Updated fine

Seems quite fantastically stable

Past non-responsive issue seems resolved - still testing

(Is there a issue showing energy consumption? My currently poorly support Aeon HeM version 2 can't select the tick box 'show energy consumption' but isn't completely supported - apparently fixed in 4.002). Similar report for version 4.xxx on bugzilla

[A.Socha 133]

GlennNZ, testers got version 4.001 that way it is on bugzilla

on 3.x be sure that device is configured, w/o that you will not be able to check and to saw that device in energy panel

[GlennNZ 0]

A.Socha

Thanks for the quick reply and the seemingly stable release

But

On Aeon HEM 2 - configured and showing KwH values (this version issues

Please login or register to see this link.

)

When I click

"show Energy Consumption measurements"

and save

It remains unclicked and no energy consumption measurements seen

Have tried Chrome and just now Explorer and Ipad - same result

Seems the same as this bugzilla report

Please login or register to see this link.

Fixed - by Configure all devices again: - ?upgraded device -> but now lets me report energy usage. Thanks.

Hopefully back to stable Hc2

Glenn[/u]

[Guest shapa]

Cosmetic issue:

"Show child devices:" setting doesn't work anymore.

Slave device always shown. Only for newly added devices.

[A.Socha 133]

tested on switch and it working, on what device you got problem?

[Guest shapa]

Vitrum dimmer

Main Lights + 367.1

Please login or register to see this attachment.

Please login or register to see this attachment.

Please login or register to see this attachment.

[htatton 0]

Update to 3.590 without any issues.

[dcspock 17]

After the upgrade, the same problem still occurs as described in this post on beta version

Please login or register to see this link.

HC2 is receiving information from the nodes but sending does not work!!

First, I rebuilt the network via HC2 configuration panel, I ran a scene with fibaro:call(1,'requestNodeNeighborUpdate',1). But then I realized that HC is receiving status information but activating e.g. a roller blind via web interface, iphone app or ipad app is not working.

Checking the event panel or the logs via api/panels/event?.. I see all entries e.g. when I push a switch or open a blind manually or even if my motion sensor is breached - so the network seems to be fine. But hitting a button on the web interface or iOS-App (got both, iPhone or iPad) - nothing!

[richo 4]

Interesting, after the update I got such a screen !?

Fortunately after rebooting the HC everything looks OK ...

Please login or register to see this attachment.

[A.Socha 133]

richo, after restart hc is still start in recovery?