Fibaro Motion/Light Sensor in a scene

[RiccardoCanetta 13]

Hi all,

I would like to do a scene like this

if motion is detected and light sensor < 200 Lux then switch on light

The problem is that when I add Light Sensor to the scene, I get only the standard operators (ON, OFF, Opened, Closed, etc). How do I specify the Lux condition? I have searched the forum and couldn't find anything..

Thanks in advance

Riccardo

[MalvinYNJ 4]

It should work as simple as this.

Please login or register to see this image.

[RiccardoCanetta 13]

wow, thanks!

[ruslebiff 0]

i want to create the same. can you please post a screenshot of your scene?

[RiccardoCanetta 13]

Hi, unfortunately I'm not able to attach picture (I get an error) anyway it's the same as above, just with <= 200 instead of >

Hope it helps

Riccardo

[ruslebiff 0]

thanks! i will test it out

[DmitriyP 0]

I'm working on the same scene.

How switch off light if no motions detected?

[ Added: 2014-08-22, 20:43 ]

It should work as simple as this.

Please login or register to see this link.

I have made scene like above in my HCL however time between motion and light switch on about 30-60 sec. What is wrong?

[RiccardoCanetta 13]

Hi,

this is my complete scene - light is turned off after 10 minutes and obviously if there is more movement is turned on again afterwards

Hope it helps

RIccardo

Please login or register to see this attachment.

[DmitriyP 0]

rcanetta, how fast light turn on after movement? In my case it's 30-90 second and I don't know how do it faster

[MalvinYNJ 4]

DmitriyP, lights should be turned on immediately after your trigger factor has been triggered. For example if the lux is < 200, turn on the light. In this case, once the lux is less than 200, it should turn on the light immediately.

[Bumperke 0]

Is it possible to reset the counter until there is no more movement? So that the lights only turn of when there is no more movement.

[MalvinYNJ 4]

Bumperke, yes you can, just create a counter and reset it when there is no breach on the sensor.

[Ace02 2]

MalvinYNJ, is it possible that you have a screenshot of this or can tell how this is done?

[MalvinYNJ 4]

Ace02, you using HCL ? What do you wanna do?

[Bumperke 0]

MalvinYNJ, I think he wants to know how we can create and reset a counter. I'm also curious about this

Please login or register to see this image.

/emoticons/default_icon_rolleyes.gif" alt=":roll:" />