From HCL to HC

[parabolax 1]

Hi, i have a fibaro HCL. I decide to "upgrade" to HC. is possibile to use the configuration of all modules without reconfigure? if yes..how?

brgds

[akatar 208]

as far as i know: no

you have to do it all over again

[Ulf100 4]

If this is really the case, Fibaro needs to do something about it!!

[parabolax 1]

Please login or register to see this image.

/emoticons/default_icon_question.gif" alt=":?:" /> but what happpens if i put a new HC controllore and set up the HCL as slave?

[akatar 208]

then you can control everything with the master hc

but the devices must be "in sight" of the hcl

[j.nowacki 5]

parabolax, as you suggested, you can use gateway connection functionality and control devices added to HCL with HC2 interface.

[parabolax 1]

ok, i'll try

Please login or register to see this image.

/emoticons/default_icon_wink.gif" alt=";-)" />

[ Added: 2014-08-27, 19:51 ]

I install fibaro HC..and have a fibaro HCL too. Now...what i must do to put HC as gateway and see al the configuration of HCL??

thanks

[Fibarium 0]

ok, i'll try

Please login or register to see this image.

/emoticons/default_icon_wink.gif" alt=";-)" />

[ Added: 2014-08-27, 19:51 ]

I install fibaro HC..and have a fibaro HCL too. Now...what i must do to put HC as gateway and see al the configuration of HCL??

thanks

...Same problem here...

Trying to put HCL as a slave and control everyhting via the main HC2...with no success!

I double check the forum for clear/basic instructions on how to set it up but, again...no success!

Can you guys help me?

To the Moderators...fell free to move this post to an appropriate thread or create a new one.

Thanks!

[akatar 208]

both hc must be on the same software level, in youre case 3.5x

in you must use a pincode

then you are good to go

[Fibarium 0]

Akatar,

thank you for your fast response!

I have done it and...it seems to work properly!

Just added the fibaro motion sensor right now and it is all fine exept for a minor glitch:

whilst detecting a movement the image on the main HC2 it is broken, everything ok if no movement is detected (image is shown properly). No such a issue on the slave HCL...the image of the fibaro "blue eye" is there!

[KristianO 15]

I'm planning to buy a hc2 but got all my devices today connected to HCL. Is migration possible? Do I even need to do it? Are they working as 1 solid unit despite it's 2 controllers?

[Fibarium 0]

Look like ...yes (I am not that expert though).

Please login or register to see this link.

hope this thread help!

Please login or register to see this image.

/emoticons/default_icon_smile.gif" alt=":-)" />

[akatar 208]

Look like ...yes (I am not that expert though).

Please login or register to see this link.

hope this thread help!

Please login or register to see this image.

/emoticons/default_icon_smile.gif" alt=":-)" />

youre link is this thread.....

[Fibarium 0]

Please login or register to see this image.

/emoticons/default_icon_eek.gif" alt=":shock:" />

Please login or register to see this image.

/emoticons/default_icon_eek.gif" alt=":shock:" />

Please login or register to see this image.

/emoticons/default_icon_eek.gif" alt=":shock:" />

...Ok...time to go to bed!! Worked too much on the computer today!!

Please login or register to see this image.

/emoticons/default_icon_biggrin.gif" alt=":-D" />