Fibaro Roller Shutter 2 + AEON minimote without gateway

[teakea 0]

Hello everyone.

I have a Fibaro Roller Shutter 2 and an AEON minimote. I'm trying to manage the Roller Shutter with the minimote without gateway.

Anyone can tell me if I can do it? And, how I can do it?

I follow de instructions but it doesn't works.

Thanks!

[j.nowacki 5]

teakea, I can provide you with instruction how to use Minimote with our controller, but to get information about using it as stand-alone device you should contact AEON support.

[teakea 0]

j.nowacki thank you for your fast reply.

What is the instruction tu add the roller shutter? Or maybe how to use?

[j.nowacki 5]

I post instructions for dimmer, roller shutter will be the same:

1. Get HC2, minimote and dimmer

2. Add Dimmer to HC2

3. Add Minimote to HC2

3.1 Click "Learn" at Minimote (blue LED will slowly blink) and Add device in HC2. HC2 will start adding monimote.

3.2 Wait few sec to finish including minimote to HC2

4. Create association

4.1 Click "Associate" at minimote - blue LED will slowly blink.

4.2 Click 3x at dimmer B button - lue LED will blink fast

4.3 Again click 3x at dimmer B button - blue LED will blink and flash solid blue light for 2 sec.

5. Creating connection

5.1 Push and hold one mains buttons of Minimote - blue LED will blink slowly

5.2 Click 3x at dimmer B button - LED will flash solid and get back blinking. You need still hold Minimote button

5.3 Set up dimmer 100% from button and relere Minimote button

That's all. Now you have associated miminote with dimmer.

[teakea 0]

Thank you.

I have a question. When you push 3x B button, the blue Led have to blink anytime? Because in my case, when I push B button 3x, the controler doesn't do anything

[j.nowacki 5]

teakea, LED I mentioned is located on minimote itself. As I said this is instruction regards situation when FIBARO module is added to our controller, if you need information about how to add module to remote as stand-alone device you should contact AEON support

[teakea 0]

Ok, but the Led I'm refer is this:

4.2 Click 3x at dimmer B button - lue LED will blink fast

Are you trying to say that the blue LED from minimote will blink fast?

Thank you j.nowacki

[Kostas 0]

Hello,

So does the minimote  REMOTE controller work with Fibaro roller shutter 2 without the presence of a gateway (Home center 2)?

The same question goes for Fibaro keyfob remote controller.

 

Thanks in advance