Update HC2 4.019 BETA

[I. Szymanski 0]

Fibaro Home Center 2 v 4.019 BETA.

Beta version is designed for user testing and soon will be released as official.

WARNING! After installing this upgrade backups from version 1.x and 3.x will be retained but hidden because they are incompatible with the version 4.x. In case of update from old version, v1.x, after that update all users will be deleted. Admin password will be reset. Also update to Beta software all devices will be automatically reconfigured to work with new system architecture. Reconfiguration progress will be shown in pop-up window.

This update can last longer than previous. If this update lasts longer than 30 minutes, please go to main HC2 address (e.g. 192.168.0.1).

If "System temporarily unavailable" text will appear during update, please wait - you will be redirected to the main page when all services start.

4.019:

New Functionalities:

- Configuration > Backup now is Backup & Recovery

- Recovery Memory Status - can be checked on Backup & Recovery

- Backups - information about compatibility with current HC version

Resolved Issues:

#0001359: For some reason 1 smoke sensor doesnt show black box info.

#0001524: 3.902 Alpha - HUE plugin won't create new user

#0002037: Cannot delete device, but after a restart the devices shows as being deleted

#0002048: JSON ENCODE / DECODE doesn't work properly

#0001920: [ERROR] 09:23:47: line 44: attempt to index global 'json' (a nil value)

#0001699: panel energii

#0001849: Fibaro Door and Window Sensors do not report

#0001852: Unable to delete devices

#0001861: Since upgrading no scenes work

#0001877: HC2 stops working on 4.017

#0001709: When adding Foscam generic camera to plugin the password field is misspelled "Passwrod" should be "Password"

#0001824: Aeon Switch with energy meter. No more energy measurement/logging after upgrade to 4.017 beta.

#0001935: Notification of the battery status

#0001963: Event panel refreshed while browsing

#0001869: Fast scrolling in event history

#0001894: Log messages do not span columns

#0001655: Changing pages results in spinning wheel

#0001815: Power calcutaion is only working in rooms with Fibaro Wall plugs

#0001790: Virtual Device icon change causes a crash

#0001834: Get error 502 and 503 after virtual device import

#0001701: Controlled device is set to Air Conditioner on dimmers

#0001962: UI crashed after creation of magic scene

#0001966: setting " How frequently GPS position from the user?s iPhone should be collected" is not saved after reboot hc2

#0001888: Execution of lua commands

#0001907: Danalock POL_ZES100 (Z-Wave Danalock Square) sowing but not functional

#0001596: universal sensor has not the normal picture and dallas 18b20 temp does not work

#0001652: uni bin sensor breach scene does not work

#0001548: Nie działa triger włączenia włącznika Duwi

#0001812: HC2 doesn't respond anymore

#0001593: Email address validation wont allow + to be used

#0001651: HTML special characters being displayed in Virtual Device code

#0001946: fibaro:getSelfId does not work

#0001889: Unable to debug slider code

#0001992: FGK-101 with a DS18B2

#0002005: After creation of a magic scene i'm unable to login to the fibaro home center (keeps loading)

#0002023: Disarm sensors with scene

Known Issues

- Breached sensoer with Arm Delay causes instant alarm after being armed

- Data range selection in event panel doesn't work properly

- For devices imported via Gateway Connection may have no icons

4.018:

Resolved Issues:

#0001566 All versions of FIBARO cannot support the switch state to return to the "Multilevel Switch Command Class, version 2"

#0001576 Untranslated text in Satel input/zone page

#0001578 Cannot change label value

#0001618 HSP02 no longer has parameters

#0001624 no different color for slave devices

#0001630 Reconfiguration did not run on a dimmer, resulting in no "sceneactivation"

#0001631 Roller Shutter 2 scene won't close

#0001711 Danfoss LC13 and older model are dead or E5 on the Danfoss itself

#0001773 Danfoss LC13 no Icon displayed

#0001747 Weather display wrong place

#0001834 Get error 502 and 503 after virtual device import

#0001836 Lili

#0001853 After upgrade web interface is slow when changing views

#0001873 No push messages possible on iPad/iPhone with 4.017

#0001880 Not able to set Variable manually anymore

many other fixes

Known Issues:

- Important! User Developed Plugins will be removed with this update. Please be sure you have your plugin source code.

- Important! Remote access is NOT available for this version.

- Gateway Connection - status of dead device between master and slave controller may be different

- Devices not properly configured on 3.X may not be converted properly

- Reconfiguration may not work properly in some cases

- On mobile clients devices may be visible in different categories than configured

- Advanced settings for some imported devices may not work properly

- Plugin for Sony TV will not work with newest Sony Firmware

- Event Panel- some issues with scrolling

- LUA functions fibaro:log("") i fibaro:call(id, "setproperty", "") may have some issues

- Horstmann Switch HRT4-ASR-ZW is not fully supported

- Horstmann Thermostat HRT4-ZW- higher battery usage and incorrect reports in some cases

- Doorlocks- some functions may not work properly

- Thermostats Setpoint- are not fully supported

4.017:

New functionalities:

User's Plugin Installation - ability to build and install Home Center plugin

FGHC Rest API Active Documentation - documentation and ability to test REST API requests, access at HOME_CENTER_IP/docs

Added support for American English (EN-US)

Plugins:

Nest - plugin for well-known thermostat

Netatmo - plugin for thermostat and weather station from netatmo

3.907:

This version mainly concentrate on adding better support and integration for more devices (not only z-wave device).

Important part of software responsible for management z-wave devices was rebuild from the scratch for better support different devices types.

New Home Center software introduces support for plugins. Plugins give support for new devices and new functionalities without modifying HC Firmware. Plugins can be used for controlling devices via different protocols and standards like TCP/IP, IR*, RS 232*, UPNP. Plugins have their own user interface and can call all APIs available on HC2. Possibility of building plugins by independent developers will be introduced in next versions.

* required additional hardware.

New functionalities

--------------------------

Drag & Drop for devices and scenes - available on home, devices and rooms screens. Assigning devices to rooms and changing its order is now much easier and faster.

Magic Scenes - new, simplified and easy to use graphical way to create scenes based on condition > action flow.

Temperature Panel - allows to see history of temperature changes in rooms and on each device.

Diagnostic Panel - general information about HC working condition like CPU & RAM usage, free space on hard drive. Will be extended in future versions.

New Z-Wave engine - redesigned and rewritten from the scratch. Now is faster and has better support for devices.

Z-Wave Door Locks support - controlling and PIN settings.

Thermostats - extended controlling for thermostats from manufacturers like: Honeywell, Trane Corporation.

Extended tamper for sensors - exclusive information for motion detection and violation of sensors.

Fibaro Smoke Sensor extended support - level of smoke and gap to alarm level is reported and visible on charts at iPad and Web Page. Sensitivity level is now easier to set.

Fibro Motion Sensor new device - when seismometer mode is turned on new device reporting tremors is available. Charts for temperature and illuminance. Additionally information about sensor violation.

Device hiding - device that is not in use can be hide without removing it.

Device deactivation - deactivated device is visible in UI but can't be controlled.

Multithreading added for HC (server and z-wave) - now engines work much faster.

Event panel moved - for better usability now is available in menu on right side of screen.

User rights management - moved to Configuration.

Block Scenes improvements - for device only available actions are visible, scene activation block added and logical conditions grouping using brackets.

Lua Scenes - updated tooltips for devices.

Plugins:

Plugins are grouped in categories: Safety, Cameras, Climate, Multimedia, Others

Plugins search

Network devices search via ARP

Plugins category Safety:

DSC Alarm - for DSC Alarms,

Helios Basic - integration using Basic license,

Helios Gold - integration using Gold license

Mobotix - for Mobotix videophone,

Satel Alarm - for SATEL

Plugins category Cameras

more than 100 devices from various manufacturers

Plugin category Climate

Carrier Furance

WS Davis Vantage

Plugins category Multimedia

LG Bluray

LG TV

NC + mediabox

XBMC Remote Control

Denon Amplifier

LG Bluray

Onkyo Amplifier

Philips Bluray

Pioneer Amplifier

Samsung TV

Sonos

Sony Bluray

Sony TV

Plugins category Other

Philips Hue

Wake on LAN

Other changes

Many other improvements to the system

Users who use version alpha from 3.901 to 3.906 need to perform recovery first and update from 3.590 after restoring backup.

[stevenvd 51]

yes... so, I'm f8cked?

I just saw a restart of the z-wave stack aswell. didn't do a restart or what so ever... Why is that?

[12] Poort openen

[12] Z-wave init.

[12] Taak initialiseren

[12] Z-wave start

mh, but I do get a json response from the heating panel and the fibaro alarm panel...

[ Added: 2014-11-28, 12:59 ]

Q&A people from Fibaro, please respond to my questions...? I am trying to get this to work and help you to get a solid piece of software. (Also my earlier questions regarding this update).

[derelict 0]

Q&A people from Fibaro, please respond to my questions...? I am trying to get this to work and help you to get a solid piece of software. (Also my earlier questions regarding this update).

good luck

[Dino 0]

Yeah yeah even a greatly appreciated forum user is loting its patience

[A.Socha 133]

robmac, i will paste here information from bugzilla about high use of memory

there is no bug we must change a bit diagnostic panel because cached memory is marked as a used so it show 99% but that is not full true

becouse fre ram = mem free+ buffers+ cached

root@fghc2:~# cat /proc/meminfo

MemTotal: 1016984 kB

MemFree: 23400 kB

Buffers: 68804 kB

Cached: 759616 kB

there was no info about that we fixed reconfiguration and dead node problem

[robmac 173]

robmac, i will paste here information from bugzilla about high use of memory

there is no bug we must change a bit diagnostic panel because cached memory is marked as a used so it show 99% but that is not full true

becouse fre ram = mem free+ buffers+ cached

root@fghc2:~# cat /proc/meminfo

MemTotal: 1016984 kB

MemFree: 23400 kB

Buffers: 68804 kB

Cached: 759616 kB

there was no info about that we fixed reconfiguration and dead node problem

Thanks Andrew,

So why do you think the web, api and z-wave is intermittently locking up?

I can not report as a bug as I can not figure out what is going on. I am sure it is not my lua. I have even gone back to a scene based version of scheduler rather than the plugin I am working on.

There is nothing running other than this. But the HC2 eventually locks up and hard restart is needed. A few of us have this.

What cache is it including?

If I run this scene 20 times the usage goes up and back down so other memory is also measured.

Please login or register to see this code.

Please login or register to see this attachment.

Please login or register to see this attachment.

Please login or register to see this attachment.

[stevenvd 51]

Andrew, do you have any idea why the api call is not working on my device?

and also what the reason for the recovery corruption is?

[robmac 173]

OK tracked down what causes my lock up...

Updating thermostats danfoss and horstmann.

Memory use increase. OK could be cache usage but eventually it just locks up the z-wave and interface.

Please login or register to see this link.

Remarkably similar to what I reported here all that time ago.

Please login or register to see this link.

I suppose I could always remove control of my heating but then HC2 will be doing hardly anything.

Well at least I can get back to developing.

[ Added: 2014-11-28, 14:12 ]

OK 4.020 out already

[derelict 0]

OK 4.020 out already

Maybe wonders start to happen by now...

... did the update... zwave process still dying