Cannot add devices

[TomM22 0]

Hi All,

I have a HC2 and 1-1 from nearly all devices in a test mode. Yesterday, I've removed all the devices (most of the were heavily re-configured, so thought a fresh install for the new version is a good idea). Now, I have 4.030, installed yesterday, with no devices - which was OK, as I removed all. But I cannot add any devices back. Tried so far an RGBW, wall plug, door and motion sensors. HC2s learning mode is staring but cannot find anything. Tried to reboot HC2 - did not helped.

Any idea what I should try? Any type of reset, as I have nothing configured yet?

Thanks!

[A.Socha 133]

Please start first few actions

1. unplug RGBW power

2. PLug RGBW power on what color it was glove? (red or green)

If green start from step 1 if red start from step 2

1. Launch removing device action on HC2 - press 3 time button B and wait for info about success removing

2 Launch ading action and again press 3 click on button B then device should be added

[TomM22 0]

Thanks!

It is working. Seems all devices remained somehow included - maybe my fault, by not properly removing those. Now, I could remove all, then add all back again!