control orvibo wifi socket

[florins1 0]

Hello guys. I bought a orvibo socket (a wifi socket), which can only be controlled manually or via its own mobile app.

Using Wireshark i managed to intercept the packets sent from the mobile app for turning on/off the socket. These are UDP packets sent to port 10000 on the socket.  I've replicated the  data from my pc using Packet Sender, and i managed to get it working.

Before the on/off commands, i must send a subscribe command in hex:  68 64 00 1e 63 6c ac cf 23 45 3d aa 20 20 20 20 20 20 c0 19 24 23 cf ac 20 20 20 20 20 20

after which i can send the on command: 68 64 00 17 64 63 ac cf 23 45 3d aa 20 20 20 20 20 20 00 00 00 00 01 or the off command: 68 64 00 17 64 63 ac cf 23 45 3d aa 20 20 20 20 20 20 00 00 00 00 00.

Now i am trying to make a virtual device in fibaro that can do this and i caught my ears on sending hex data. Here's what i have till now, but it does not work:

Please login or register to see this code.

[florins1 0]

ok, got it working, so for orvibo s20 socket this is the command for turning on :

Please login or register to see this code.

Now i have a problem receiving the data/response

Please login or register to see this image.

/emoticons/default_smile.png" alt=":)" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" /> Any ideea on how to do that?

I have tried with socket:read() but nothing happens

[Krikroff 199]

and if you read the content of "bytes" ?

[florins1 0]

i only get a number (30), the same for each on/off command

[geeklabs 1]

i only get a number (30), the same for each on/off command

Hello Florin, 

I see you have achieved some success with the orvibo plug. It would be helpful if you could let me know how to use Wireshark. As I have a Wifi DoorBell that streams Audio and video once the bell is pressed to the users mobile phone and the user can unlock the door from a remote location. I would like to integrate with Fibaro since the manufacturers are not providing the APIs.

[Lassen 0]

Any news on this ?

[fi-bar-oh 47]

+1

[uktotty 0]

So did anyone fix this? I'm new here and I have no idea how to set up my S20s