Heating panels revert themselves?

[Rait 6]

I'm using a virtual device to easily and conveniently make changes to heating panel values. The following is my Lua for +0.5C button, and it works as needed. I can check the actual heating panel and verify that the target temperatures have all been correctly updated after pressing the button a few times.

 

However - this is where it gets interesting. After some hours, sometimes as little as 2hrs, sometimes after 12 hrs, the panel targets change back to what I had originally set them to, directly on the heating panel page... 

 

I can not understand what could be causing this and how can I avoid it?

Please login or register to see this code.

[j.nowacki 5]

If there is nothing else that overwrites it there should be no such problem, I set up a controller to test it, will try to reproduce the error.

[Rait 6]

Any luck with this one, j.nowacki? I have this happening on at least 3 different HC2's so far.

[j.nowacki 5]

Sorry, nothing like that happened so far. Do you still experience it in latest updates?

[Rait 6]

I have not updated any of my users HC2's past 4.042 yet. Waiting a bit to test the stability and building up my nerve

Please login or register to see this image.

/emoticons/default_smile.png" alt=":)" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" />

 

I'll probably start updating next week, so I'll see then if the issue persists.

[Rait 6]

The issue is still there and growing more urgent now as the heating season has arrived. Right now I have 3 different HC2's doing this. All running 4.056