HC2 is not turning on and LED's go backwards

[pestergeist 0]

Hello everyone, recently ive been having this problem where the LED lights on the HC2 have scrolled left-to-right about 9 times afterwards they just turn off and the HC2 doesnt turn on.

 

i have no clue what the problem is. anyone else have experience with this problem or any ideas what to do about it

 

 

 

edit:Ive had the problem of it not booting up in one go from the beginnin. it would just shut off a few times while booting it up. 

[Guest fat]

Try pulling the USB drive out and booting it again and see if it works

[pestergeist 0]

Try pulling the USB drive out and booting it again and see if it works

do you mean booting it up again without the usb or pulling the usb out and then putting it backin and booting it up again because i read here that thats bad and i wanted to make sure i dont break the thing

even> further 

Please login or register to see this link.

[petergebruers 1,268]

You can pull it out, boot and keep running like that, but you'll have to contact support to check what's going on. They are probably going to ask you to put back the USB while the system is running, so they can check it.

[pestergeist 0]

You can pull it out, boot and keep running like that, but you'll have to contact support to check what's going on. They are probably going to ask you to put back the USB while the system is running, so they can check it.

 I removed the USB like u said but i still have the same problem, it boots and after 10 seconds of backwards blinking it shuts down. 

And i changed the power adapter to make sure there wasn't anything wrong with the wiring so that's not the problem which i thought it was at first.

[Alex 32]

Can you connect a screen to your HC2?

And tell us what you see?

[pestergeist 0]

Can you connect a screen to your HC2?

And tell us what you see?

it starts up for 10 seconds and then shuts off again. so i dont have enough time to actually see something on the screen.

[coolxt 0]

Hello. What was the problem. I have the same problem. The HC2 stopped in the night. I connected it with a screen and i see no picture while i am booting the hc. Seems likes de bios doesn't start. Someone an idea?

 

 

 

gr 

[akatar 208]

@coolxt try a different power suply

[coolxt 0]

@akatar Thank you!!!!!!!!!!!!! It's up and running again. I am verry happy that my hc 2 stil works

[akatar 208]

@coolxt you're welcome (graag gedaan   )

Edited October 10, 2018 by akatar