Dimmer 2 as buttons scene controller woithout loads?

[miha89 1]

Hello, is that possible to use Fibaro Dimmer 2 just as a repeater of z-wave network and scene controller by pressing 2 buttons? There is no any loads connected, just N L Sx S1 S2

 

 

Is there specified setting parameters required for that?

 

Thanks!

 

[Soft 17]

It works for me

[akatar 208]

no, only some coding or blocks

 

if (dimmer2) = on then .......

[miha89 1]

it won't send scenes without load for me...(( only when fibaro bypass connected

[akatar 208]

perhaps fibaro can tell us why it only works with a load attached

[miha89 1]

i have used Dimmer 1 without loads and it works ok, but Dimmer 2 don't send scenes

[kariem112 3]

You need something connected to the dimmer2. Without any load, they dont work. you can use a bypass for that

[petergebruers 1,268]

You need something connected to the dimmer2. Without any load, they dont work. you can use a bypass for that

A bypass 2 is indeed the recommended way to make the Dimmer 2 start up.

[T.Konopka 8]

Hello, is that possible to use Fibaro Dimmer 2 just as a repeater of z-wave network and scene controller by pressing 2 buttons? There is no any loads connected, just N L Sx S1 S2

 

 

Is there specified setting parameters required for that?

 

Thanks!

 

Hello,

 

Dimmer 2 needs load to work.

 

perhaps fibaro can tell us why it only works with a load attached

 

One should consider Dimmer 1 and Dimmer 2 as completely two different modules. The idea of Dimmer 2 was not exactly the same as Dimmer 1.