Activate scene per click type for roller shutter device

[PinDic 0]

I would like to configure my HC2 so that the shutter switch will do this:

• Single click up : open blind all the way
• Single click down : close the blind all the way
• Double click up : open blind to mid position of 20%
• Double click down : close the blind to mid position of 20%

Can this be done?

Thanks in advance

[Jamie mccrostie 82]

14 hours ago, PinDic said:

I would like to configure my HC2 so that the shutter switch will do this:

• Single click up : open blind all the way
• Single click down : close the blind all the way
• Double click up : open blind to mid position of 20%
• Double click down : close the blind to mid position of 20%

Can this be done?

Thanks in advance

 

If you check out the roller shutter manual It says it supports scene activation .

So your up/down should work normally on single pushes after your first set up .

Then build two scenes, one for the open  to mid positions and one for close to mid position. You would then link them thru scene activation to the two up and down buttons double clicks

You could do this with block scenes if you havent cracked lua yet

The photo shows the scene activation codes depending on if its S1 or S2 switches, how many button presses and what parameter settings for button types ie rocker or momentary. Does this help?

Please login or register to see this attachment.

 

[Jamie mccrostie 82]

Sorry you also have to turn scene activation on in the parameters, because its off by default .

Read the roller shutter manual and Google Fibaro scene activation there are good examples.

[T.Konopka 8]

The topic has been moved from "

Please login or register to see this link.

" to "

Please login or register to see this link.

".

 

Temat został przeniesiony z "

Please login or register to see this link.

" do "

Please login or register to see this link.

".