Start scene after enabling Fibaro alarm

[Fitchie 1]

Hi all,

 

 

After enabling the HC2 build in Fibaro alarm, I would like to activate an additional scene, see sample below.

 

Steps:

 

- enable HC2 alarm and leave home

- wait 3 additional minutes

- start scene 'away'

 

Scene 'away'

 

- switch off lights

- close garden fence

- send notification to mobile device

 

So please do some of you know how to check within a LUA scene if the build in alarm is enabled ?

 

Many thanks !

[Guest spazpeker]

You can use a magic scene for the first part, that then turns on a scene that does the second part.

 

Edited August 7, 2017 by spazpeker

[Fitchie 1]

4 hours ago, spazpeker said:

You can use a magic scene for the first part, that then turns on a scene that does the second part.

 

 

Hi Spazpeker,

 

Thanks for your feedback. I did follow your instructions:

 

- Magic scene to check alarm status (partially armed in this case)

 

)

Please login or register to see this attachment.

 

- Followed by a simple action (switch off outside outlets in this example):

 

Please login or register to see this attachment.

 

But regardless the alarm status, the outlet switch will not be toggled.

 

Edited August 7, 2017 by Fitchie

[Guest spazpeker]

Ok i have a block scene that turns off my alarm sounder when the alarm is disabled, instead of disarmed you can choose safe and armed.

Please login or register to see this attachment.