FGS-223. Turn on associated device by double click

[aivs 2]

I use momentary switch with FGS-223 (param 20 = 0).

I added device to FGS-223 second association group. When I double-press, FGS-223 sent to device level 99, it's ok, BUT FGS-223 also turn on!!!

Is it possible by 1 click to turn on FGS-223, by 2 clicks to turn on associated device ?

[szmyk 52]

I have similar problem with FGS-223. 3 click triggers my scene but the light is switched off also. I'd like to trigger my scene without changing light status.

I reported it to fibaro support 1 year ago and got answer that it should work properly but they have to check it. And I'm still waiting for a response...

[I.Srodka 4]

Hi,

 

Unfortunately, it's not possible with our Double Switch. Beside it's additional functionality, it is also a normal mechanical switch which is triggered every time you click the button.

 

The best device for such actions is

Please login or register to see this link.

: 

Please login or register to see this link.

 

You can set there multiple clicks for different actions.

 

 

Edited August 18, 2017 by I.Srodka

[szmyk 52]

Pity, because old Dimmer can do it. Switch 2 is a newer module with less opportunities...

 

I used 3 click to switch off the light in my bedroom with 10 s. delay. For 10 s I could go to bed and lie down. It was may favourite scene. I had to change Dimmer do Switch, bacause Dimmer can't handle energy saving light bulbs (blinking).

Edited August 18, 2017 by szmyk

[Mosskit 4]

Hi, can you please confirm that old Dimmer (Dimmer 1) can trigger double action scene without changing the state of the O1/O2 circuits? 

[szmyk 52]

Yes, I confirm.

[Mosskit 4]

The same story is with relays. Double and triple click activates the o1/o2 llight circuits. Any solution for that?

[Mosskit 4]

Anyone with similiar issue on Relays? Any solution?

[miroslav.petrov 7]

I am also looking for solution. I would like to turn on the AirCon with double click and turn it off with tripple click. Its very annoying that the light changes state every time...

[Joep 193]

Change parameter 23 to 0 did the trick for me.

 

I have a momentary switch that runs the go to bed scene when double clicking, but the lightbulb connected to the switch went to max when double clicking it. Therefore I changed parameter 23 to 0 and the problem was fixed. One caveat. You cannot easily set the lightbulb to max level anymore.

[Mosskit 4]

there is no param 23 in advance tab for my device..

 

Please login or register to see this image.

/monthly_2018_09/image.png.e94093987c905795b73f6bb7668ec124.png" />

 

@

Please login or register to see this link.

 

Please login or register to see this link.

 Can you check what version of module do you use?

Edited September 11, 2018 by AnonymousJohn
extending question to Joep @

[[email protected] 0]

Is there a solution?

[Joep 193]

On 9/8/2018 at 12:38 AM, mosskit said:

there is no param 23 in advance tab for my device..

@

Please login or register to see this link.

 

Please login or register to see this link.

 Can you check what version of module do you use?

 

I was on vacation, therefore I missed your message. I have a com.fibaro.FGD212 device, version 3.5.

 

Please login or register to see this image.

/monthly_2018_10/image.png.0d3bc9ee3e67ee3de701cc1064d644c7.png" alt="image.png.0d3bc9ee3e67ee3de701cc1064d644c7.png" />

 

Parameter 23 is also described in the manual at:

Please login or register to see this link.

 

 

[szmyk 52]

Dimmer 2 has got this parameter.

Still no solution for Switch 2.

[Mosskit 4]

7 hours ago, Joep said:

Please login or register to see this link.

 

Parameter 23 is also described in the manual at:

Please login or register to see this link.

 

 

We have been talking about relay module.. NOT DIMMER my friend. There is no such parameter on relay switch. If I knew this limitation to relay switches I would skip them for dimmers only. Now, I regret.