Important! Sensor [xxx] again

[10der 832]

Please login or register to see this image.

 

 Important! Sensor Температура detected high temperature. It may mean potential fire.

 

too much false notifications.

so, my question is: is it a fault for Aeotec multisensor 6?

should I report to Aeotec support or it's Fibaro fail?

 

Thank you!

from forum.

just for your info!

 

Quote

 

I had the same issue with mine only when setting parameter 201 Temperature Calibration to 221 (- 2c ).
Seems these Aeotec mutlisensors are +2 c off. So I've left 201 = 0 and adjusted -2 on the temperature device directly. When you edit the temp device there is a adjustment box. I set it to -2. No more spikes.

 

 

 

[RH_Dreambox 189]

No, it's not wrong with your Aeotec.
The problem also arises with Fibaros UBS.

 

I think the error occurs when transferring data from the device to Fibaro.
The had the same problem with a 1-wire network on a Raspberry.
I had to put some pauses in the software to get a better communication.

[10der 832]

4 hours ago, RH_Dreambox said:

No, it's not wrong with your Aeotec.
The problem also arises with Fibaros UBS.

 

I think the error occurs when transferring data from the device to Fibaro.
The had the same problem with a 1-wire network on a Raspberry.
I had to put some pauses in the software to get a better communication.

 

 

Thank you for replying, but strange - I have 3 Fibaro "eyes" sensors and 5 Aeotec MS6 sensors

no false positive about temperature from Fibaro dev and every day (sic!) from some Aeotec MS6

look like sexism :D ha ha ha

[TMF 1]

On 10/22/2017 at 4:49 PM, 10der said:

 

 

Thank you for replying, but strange - I have 3 Fibaro "eyes" sensors and 5 Aeotec MS6 sensors

no false positive about temperature from Fibaro dev and every day (sic!) from some Aeotec MS6

look like sexism :D ha ha ha

Hey @10der

 

Sorry for being a gold digger

 

I'm having this exactly issue. Do you have any updates on this or the problem persists?

 

Regards,

TMF

[10der 832]

7 hours ago, TMF said:

Hey @10der

 

Sorry for being a gold digger

 

I'm having this exactly issue. Do you have any updates on this or the problem persists?

 

Regards,

TMF

Yes, bad connection and CRC error in packages between HC and MS6

when I relocated HC at the middle of the house no error. Zniffer show me ally some minor CRC errors with some devices NeoCoolCam what lactated too far from HC and no hops (direct connection)