Wallmote integration with HC2

[Steve B 0]

Newbie here so please treat me gently....

 

I have a Wallmote Quad switch that I am trying to do some basic things with in HC2 but am struggling badly. 

 

I can configure basic lights on/off etc either with direct control from HC2 or by associating the Wallmote directly with the device. My struggle is getting the dimmer swipe up down function to work

 

Few assumptions:

From the manual it seems that the dimmer function can only be used by associating directly with the Fabaro dimmer module, have done this but still can only achieve on/off

Parameter 3 need to be set to 1=Enabled, have done this also but still cannot seem to get the dimmer function to work

 

Am sure I am doing something wrong but having played with this for a few hours thought I would reach out to help

 

Thanks

Steve

[Lauri 6]

Hi, Im using this at home and works very well.

 

Parameters:

 

 

And I checked, I have group 2 and 3 associated with Fibaro dimmer. I can dim by holding button or swipe up/down. Both works.

 

Please login or register to see this attachment.

Edited December 7, 2017 by Lauri