Aeotec Multisensor 6 auto turn off lights

[serrzy 5]

Hello

 

I am trying to setup a scene using the Aeotec Multisensor 6 to automatically turn off the light after 600 seconds of no motion. However, if there is motion within the 600s, the counter should reset and start counting the 600s again.

 

The below block scene does not seem to reset the timecount, such that after 600s the light will turn off despite there being motion in the room - what am I doing wrong here? Is there a problem with my scene parameters or my device parameters?

 

Thanks!

 

Please login or register to see this attachment.

 

Please login or register to see this attachment.

 

Please login or register to see this attachment.

[SveinHa 0]

I have a similar approach but my problem seems to be opposite of yours in that the light quite frequently don't turn off. When testing with a short time like 60 sec it seems to work but longer times seems to fail...

Please login or register to see this attachment.

Please login or register to see this attachment.

[SveinHa 0]

I think I have found a workaround for my problem. When working with the HC2, these timed scenes seem to stop but checking the "Start with HC2" box seems to correct it or at least work around the problem.