Dtu-h100

[robd 2]

Hi All, 

I have a ventilation unit with an RS232 interface from which I want to feed readings into my HC2. After long and unsuccessful attempts to use a RPi and a FTDI USBtoRS232 converter as interface  I have abandoned that path. Finally the culprit  appeared to be the FTDI converter.

Anyhow, I decided to buy a DTU-H100 IP to serial converter. 

This works fine and with my Python program from the RPi I can retrieve the so needed readings from the ventilation unit. 

The next challenge is to get rid of the PI. 

Is it possible to create a VD that sends a HEX message to an IP number on a specific port and next receive a HEX message from that same IP number?

ofcourse I have to port the Python program to LUA but that seems to be  a minor issue. 

And yes, I could connect my HC2 to the Pi and do some json stuff but that’s an extra, probably redundant device in the chain. 

 

Thanks. 

[BOT 1]

The topic has been moved from "

Please login or register to see this link.

" to "

Please login or register to see this link.

".

 

Temat został przeniesiony z "

Please login or register to see this link.

" do "

Please login or register to see this link.

".