Projection screen + Roller Shutter

[Sjekke 87]

I got my hands on a Projection Screen with motor. The switch (up/down) was lost and so not included. I want to connect this screen to a Roller Shutter.

 

Will this work?

Anyone experience with this?

 

Type = 

Please login or register to see this link.

 

 

 

[Axeman 5]

Hello Sjekke,

 

I have a few questions (the link you provided does not contain any info on the projector screen).  Is the motor an AC or a DC powered? if it is AC ( the motor has 4 wires Neutral, Ground and two for powering the motor from both directions up/down) then yes you can control the projector screen via your gateway. If it is a DC motor (on normal occasions 3 wires a ground and 2 live)  you could purchase a fibaro double relay and connect the motor.  A side note, you could also purchase a switch for controlling the projector screen from the roller shutter or double relay module as well.

[Sjekke 87]

Hi @Axeman

 

This is what I see. If I take a look at my motors for my Roller Shutters (Chamberlain), I think it's the same wiring.

 

1 yellow-green Equipment Grounding Conductor 
2 blue Neutral
3 black Phase Direction of Rotation 1 (UP)
4 brown Phase Direction of Rotation 2 (Down)

 

 

 

Please login or register to see this image.

/monthly_2018_08/IMG_2803.jpeg.18a638697c3111ce6f99413f590ccf43.jpeg" />

Please login or register to see this attachment.

Edited August 27, 2018 by Sjekke

[Axeman 5]

Yes it will work for both projector screen and the roller shutters.  Do the wiring as described in the manual below (Q1, Q2 are for up/down, wires black and brown) and as i mentioned before you could also wire any switch for controlling a blind/roller shutter etc that you can find at your local electrical supplier.

Please login or register to see this attachment.

Edited August 29, 2018 by Axeman

[Sjekke 87]

@Axeman thx Axeman, but a normal switch is to easy 

[Axeman 5]

Indeed but what i am saying is to have both just in case a fibaro roller shutter that is also connected with a switch :)

[roelnic 1]

You might want to watch this youtube movie: