Dimmer 2 on with scene and of with switch

[Guest Ravaoo]

With a sensor and scene a set on the dimmer 2. Afther some time i use the momentary switch to switchs of, and nothing happens. When i pusch the swiths a few seconds later, the lights go of. 

I heve to push twice to get the lights of.

When i put on the lights with the switsh and not with a scene, then i can put out the lights with one time klicking on the switch.

 

How can i set de dimmer2 so it wil always goes of with one click if it is on?

[3JL 7]

Is the 'momentary switch' wired to the dimmer module? Or does the momentary switch control the dimmer via e.g. an association?

[Guest Ravaoo]

On 8/29/2018 at 9:42 PM, 3JL said:

Is the 'momentary switch' wired to the dimmer module? Or does the momentary switch control the dimmer via e.g. an association?

 

It's on the s1 from the module

Edited August 31, 2018 by Ravaoo

[Joop 0]

I have the same problem with the second switch which controls extra devices which are set in t he association group 4. I know that when these devices are set on by a script, the switch doesn't know that the status is changed. So you need the possibility to say to the switch that the status is changed. How can you do that?