Steinel XLED home 2 Z-Wave - association

[jakub.jezek 340]

Hello,

 

Got product XLED for some toying with and i have some thought about device to share.

 

It is very nice outdoor night light (floodlight), that shines with 80lm/w (it has about 16W).

 

It has potentiometer, with which you can regulate treshold between day and nigh according LUX measurement. I set potentiometer to 0, to check "day" behaviour.

 

While potentiometer is set to different level then max, then i got heavy trafic originating from that device (sample of communication on screenshot below). It does seem to send to HC Basic Set command to turn off. So, i deleted all associations i set and had there Lifeline only. But still, traffic is there. So complete Z-Wave network got delayed.

Please login or register to see this spoiler.

Device does not send those turn offs while potentiometer sets to max (perma night).

 

Product:

Please login or register to see this link.

 

Best regards,

Jakub

[tinman 984]

I have toyed with Steinel as well, here my findings. Yes, for their motion sensor, but the Steinel firmware is very similas

 

 

Please login or register to see this link.

 

 

[jakub.jezek 340]

Hi @tinman,

 

Great blog. In my case i don't seem to have that working motion slaves.

 

I was following your blog to letter regarding Steinel settigns, but that thing is still slowing my Z-Wave network. I will get contact with Steinel then.

 

 

[tinman 984]

read back parameter 8 and 9 and tell me the values you have

[jakub.jezek 340]

5 minutes ago, tinman said:

read back parameter 8 and 9 and tell me the values you have

Will do tomorow. I don't believe i will have time for it today.

[jakub.jezek 340]

On 11/12/2018 at 12:02 PM, tinman said:

read back parameter 8 and 9 and tell me the values you have

Sorry, it took me awhile to get to device.

 

Param 9 has value 2 and param 8 has value 0. I have set parametr 8 according your blog.

 

Please login or register to see this image.

/monthly_2018_11/image.png.27a5471b0963532a9f63dbfbaaa72fac.png" alt="image.png.27a5471b0963532a9f63dbfbaaa72fac.png" />

Edited November 15, 2018 by jakub.jezek

[pepite 0]

Hello @tinman

 is it ok with this steinel product ?

[aleks 0]

Hi @tinman,

 

thanks for your Blog. I tried to follow your instruction but struggeling by setting the parameters.

 

Tried to set the parameters 1, 2 and 8 to your recommented values but I only get "undefined"  for all three of them.

Any idea?

 

next thing I tried to do is setting a scene which switch on the light constantly between 8pm and 10pm - problem is it switchs of when a motion is detected.

Any idea to this problem, too?

 

Thanks

Aleks

Edited April 19, 2019 by aleks

[net 8]

Hi @tinman

I tried to get the movements of the Steinel XLED ZWave into fibaro and followed your instructions on the Intuitech blog.

But somehow it does not show the motion submodule, and the last motion time.

Do I need to change other parameters?

 

Please login or register to see this attachment.

[Hedz 1]

I have the same i

On 11/15/2019 at 10:01 PM, net said:

Hi @tinman

I tried to get the movements of the Steinel XLED ZWave into fibaro and followed your instructions on the Intuitech blog.

But somehow it does not show the motion submodule, and the last motion time.

Do I need to change other parameters?

 

Please login or register to see this attachment.

 

Hi I have the same issue with a L810 iHF Z-wave lamp. I just cannot get the motion sensor breached in the Fibaro HC2.  Would love to learn the settings to get that done as that is the main purpose for the lamp for me.