Tankfilling

[vewe 0]

I have a scene problem with a hcl. I have a well pump that fills a watertank of 5000 liters.

Now i control it with a schneider zelio but I like to integrate it in my fibaro.

I want to start the pump for 15 minutes, stop for 45 minutes start again for 15 minutes stop 45 minutes ..... tilt the tank is full.

I have a logichome LCH5020. I use one output to switch the pump.

On the tank I have a levelswitch connected to a fibaro universal sensor.

I tried a lot of scenes but not one works.

Can somebody help me

..

[hTiger1 50]

Create a variable: "Levelswitch" that can be "On" or "Off"
Try these 2 automatic scenes with the fly only in "Pump"

Run 15 minutes: 

Pump = On
and
Levelswitch = On
then
Pump = Off 900

Stop 45 minutes:
Pump = Off
and
Levelswitch = On
then
Pump = On 2700

 

And this automatic scene with the fly only in "Levelswitch"
Turn off pump when full:
Levelswitch = Off
then
Pump = Off

When Levelswitch = Off stops the scenes
To start the scenes again, you can create this manual scene.

Start Pump:

Levelswitch = Off
then
Levelswitch = On
Pump = On

In order for this to work, "Levelswitch" must not go "On" by itself.
If "Levelswitch" goes "On" by itself, a "Stop" variable must be inserted. 

Edited December 2, 2018 by hTiger1