Dimmer 2 Not Working with Magnitude MLV LED Driver

[bfb1963 0]

Dimmer 2 fails to control my MLV LED Driver.  I only get the constant red menu light.  I cycled through the menu and reset the device.  When at the blue light, I let it autocalibrate, but it always results in a constant red.  My driver is the Magnitude M150L24DC-AR.  It is an MLV Triac magnetic transformer that is 150W capable,  but is not driving more than 110W in my appliaction.   Is there a compatibility problem with Dimmer 2 and this driver?

 

Thank you,

bfb

 

Here is the specifications for the driver:

 

Driver Specifications

Max Load	150W
Input Voltage	120V AC
Input Current Full Load	1.95 A
Output Voltage Full Load	23.1V DC
Max Output Current Full Load	6.5 A
Open Circuit Output Voltage	25.6V DC
Power Factor	0.93
Avg. Efficiency	85%
Coil Former	Double Section Bobbin
Maximum Ambient Temperature	-30°C to 45°C
Minimum Installation Space Between Units	5" Inch
Thermal Class	B130°c
Minimum Dimming Level	1%
Leads Primary	PVC 600V #18
Leads Secondary	PVC 300V #12
Circuit Breakers	Primary and secondary auto reset
Dimensions	9.8 x 3 x 3"
Weight	87 Oz.