sences lua

[mostafa251370 1]

Hello friends
I have a thermostat mco and I want to use the heating parameter as a condition in a  scene lua, which means that when the thermostat is work in the heating mode
can turn on single channel module
how to writes this condition in the scene
please help me.

Please login or register to see this attachment.

Edited January 30, 2019 by mostafa251370

[cag014 731]

Looks OK... may be it doesn't work because  of string/number mismatch

I suggest to use as follow

myVariable=tonumber(fibaro:getValue(112,"value"))

if myVariable == 1 then

 fibaro:call(75,"turnOn")

end

 

or shorter version, w/o using any variable

if tonumber(fibaro:getValue(112,"value")) == 1 then fibaro:call(75,"turnOn") end

 

By the what happens if device 112 is zero. Should you turn device 75 off?

Edited January 30, 2019 by cag014

[mostafa251370 1]

20 hours ago, mostafa251370 said:

Hello friends
I have a thermostat mco and I want to use the heating parameter as a condition in a  scene lua, which means that when the thermostat is work in the heating mode
can turn on single channel module
how to writes this condition in the scene
please help me.

Please login or register to see this attachment.

 

20 hours ago, mostafa251370 said:

Hello friends
I have a thermostat mco and I want to use the heating parameter as a condition in a  scene lua, which means that when the thermostat is work in the heating mode
can turn on single channel module
how to writes this condition in the scene
please help me.

Please login or register to see this attachment.

 

[Reinhold 18]

@mostafa251370

Why do you quote you own massage again?

Cag014 have given you a solution, or if this not working?

 

myVariable=tonumber(fibaro:getValue(112,"value"))

if myVariable == 1 then

 fibaro:call(75,"turnOn")

end

 

also you can if the devices with myVariable is 0 then off you can do the next.

 

 

myVariable=tonumber(fibaro:getValue(112,"value"))

if myVariable == 1 then

 fibaro:call(75,"turnOn") else

fibaro:call(75,"turnOff")

end

[mostafa251370 1]

Not working

[Reinhold 18]

Can you give more specific details?

What's not working, and what error do you get?

Other ways try this:

local myVariable=tonumber(fibaro:getValue(112,"value"))

if myVariable == 1 then

 fibaro:call(75,"turnOn") else

fibaro:call(75,"turnOff")

end

 

and device 112 what is this?

Edited February 1, 2019 by Reinhold

[mostafa251370 1]

Hello
I do not know why it does not work
112 ID is the setting of the thermostat mode mco.
Every time the thermostat mco begins to work with heating, it writes in detail

fibarocall(112, "setMode")

 

Hello
I do not know why it does not work
112 ID is the setting of the thermostat mode mco.
Every time the thermostat mco begins to work with heating, it writes in detail

fibarocall(112, "setMode")

 

[Reinhold 18]

Do you get from fibaro:getValue(112,"value") a 0 or 1 value?

 

[mostafa251370 1]

I do not know how I can see the ID 112
But when I write

fibarocall(112, "setMode", "1")
The thermostat starts in the heating mode

[Reinhold 18]

What do you get in the debug screen if you type and start the scene 

 

local value = tonumber(fibaro:getValue(112,"value")

fibaro:debug(value)

 

 

Edited February 1, 2019 by Reinhold

[cag014 731]

7 hours ago, mostafa251370 said:

fibarocall(112, "setMode", "1")

Might be you need read back not value, but setMode

try

fibaro:getValue(112, "setMode")

[Kage 37]

in the site menu left and then the dropdown menu of ID 112 you have Properties and Actions

is there a value in there or not

you can also klik there and it will appear in LUA

 

i don't think than fibaro:getValue(112, "setMode") will work and gives nil

[petergebruers 1,268]

I don't have this thermostat, but many thermostats have this property:

 

Please login or register to see this code.

I am not sure if this is what you want. The "operating mode" is what you ask the thermostat to do. Z-Wave defines what the values, all thermostats use the same numbers.  But it depends on the device type which values are acceptable. Some can cool, some cannot. For instance, my FGT-001 has these modes:

 

0 = OFF (pretty much every thermostat has this)

1 = Heat (pretty much every thermostat has this)

31 = "manufacturer specific" and on a FGT-001 this means "MAX" or "FULL" = valve completely open and no temperature control.

 

Here's a table of all defined values.

 

Please login or register to see this attachment.

 

But maybe you want to know if the thermostat is really turning on the heat (or AC, if it has that capability)?

 

I do not know the answer, in case of an FGT-001 this information is unavailable. The FGT-001 does not report if the valve is open and this is something that would be nice to now and quite useful

 

Sorry for being technical, but there might be a way to find out if one of your properties change: have a look at the "device" api, eg go to http://your_ip/api/devices/122. You'll see a bunch of json encoded data. If you look closely you'll find "value" and "operatingMode" and many others. Try to see if anything changes if your relay toggles... Also try different slaves belonging to the same master device. Long shot, it might be "fibaro:getValue(112,"mode") but I am really not sure.

[mostafa251370 1]

thanks guys

I succeeded

Please login or register to see this attachment.

[Kage 37]

You got two myVariable1 = (fibaro..... 

myVariable1 =( fibaro... 

myVariable2 =(fibaro.... 

[Filda-san 0]

Hello colleagues,

let me ask one question related to this topic.

 

No problem to switch the FGT-001 ON and OFF. Also no problem to set to MAX mode. All 3 operation modes are supported.

But if I switch the FGT-001 ON all the time there is setted 20°C. But my schedule require different temperature.

Please, can you give me an advice how to make the FGT to be set according to actual scheduled value? I hope no schedule synchronization is needed.

In original FGT-001 manual is written mode numer 99 to be used to get ON with last set temperature, but mode 99 is not supported. Only 0,1 and 31. So, how to get back to previously setted value after the window is closed?

 

Thanks a lot.

Please login or register to see this image.

/monthly_2020_10/obrazek.png.af164be276a5a002f2edf6b3b274f9cc.png" />