Scenes do not work

[Fibber 1]

Hello, did not you know that any scene did not work? I had 4.520, it stopped working this weekend, I updated to 4.530, then to 4.531 Beta and still the same, there are no scenes at all and I do not know why. I did not change anything in HCL, did not ...

When I click on the play icon in the scene, the pause button is made and there is still and lightly colored. It does not react anymore, it disappears only when the scene is switched off by the OFF button and then when I turn to ON, there is the play button again and once again it is poured and then it is turned around

[TonyStark 1]

I had the same problem like @Fibber.

At the newest update 4.531 (and that was earlier either, I had no time to fix it)

I couldn't run all the scenes manually, when I pressed the run button - nothing happens.

But the same scenes still works at the time triggers set.

 

That's what i did:

Goto Settings

Zwave-Network

Scroll down till Reset Energie consumption.

 

If that doesn't do the job then you have to go into every device.

 

Goto to devices.

example WallPlug.

Advanced tab

scroll down till reset energie consumption.

Only the devices that can measure energie consumption will have the reset button.

Wall Plug, Switches,

Relais Switches , Door contact will not have a "Reset energie consumption" button.

 

Thx to @flash for this guide.

 

[pucki 3]

the same goes for me

[Petar Mladenov 0]

+1

[hTiger1 49]

Hi

Have you read this thread.

 

 

[T.Konopka 8]

11 hours ago, Fibber said:

there are no scenes at all and I do not know why.

So the UI is empty and you do not see any scenes.

 

11 hours ago, Fibber said:

When I click on the play icon in the scene, the pause button is made and there is still and lightly colored

Where do you see a scene if you do not see any scenes?

Can you post a screen shot? (Please add it according to this guide

Please login or register to see this link.

)

 

11 hours ago, Fibber said:

it disappears only when the scene is switched off by the OFF button

What disappears? A scene? Or the play button on the scene?

[Fibber 1]

On 2/6/2019 at 10:29 AM, T.Konopka said:

So the UI is empty and you do not see any scenes.

 

Where do you see a scene if you do not see any scenes?

Can you post a screen shot? (Please add it according to this guide

Please login or register to see this link.

)

 

What disappears? A scene? Or the play button on the scene?

 

I see the scenes, see. video. But they do not respond to anything, see. video.

 

This video: 

 

[Fibber 1]

 

[Fibber 1]

On 2/7/2019 at 8:07 AM, TonyStark said:

I had the same problem like @Fibber.

At the newest update 4.531 (and that was earlier either, I had no time to fix it)

I couldn't run all the scenes manually, when I pressed the run button - nothing happens.

But the same scenes still works at the time triggers set.

 

That's what i did:

Goto Settings

Zwave-Network

Scroll down till Reset Energie consumption.

 

If that doesn't do the job then you have to go into every device.

 

Goto to devices.

example WallPlug.

Advanced tab

scroll down till reset energie consumption.

Only the devices that can measure energie consumption will have the reset button.

Wall Plug, Switches,

Relais Switches , Door contact will not have a "Reset energie consumption" button.

 

Thx to @flash for this guide.

 

Thank you, this tutorial helped. I'm just sorry I lost my date of consumption ...

 

EDIT: So the operation lasted for 15 minutes, after recording some consumption again scenes do not ...

Edited February 8, 2019 by Fibber

[Mikhail 0]

Hi all,

I had the same thing after update to 4.530 - all scenes doesn't work neither in automatic nor in manual mode. I reset the power consumtion but  no result.

 

[BCDS 1]

I'm in the same situation. I tried versions 4.520; 4.530; 4.540 and the result is the same. Triggering is happening but the scene stands still.
I had everyting working fine in the 4.520 and after update to 4.530 or 4.540 even I comeback to the previous backup, scenes failed to work.
I don't figure the problem. I tried many changes in scenes and nothing.
Sometimes, after sistem reboot, one-two scene works, other times no any one.
It is annoing spending time with no results...

 

After new tests, I belive that is a RAM resource problem.
I watched the RAM fluctuation (in 4.520) on PC and triggered simple scenes from the app mobile  (changing the state of two variables with push message as confirmation).
As soon as the free space of RAM is at least 5% (used space about 70% or lower) all scenes are working immediately if are triggered in that momment.
If in the next seconds the RAM increase, the scenes doesn't respond.
As I see in my sitem the RAM is running high (1-3% off free space) and I don't know what to do for the moment.
If anybody test / whatch the RAM and sees the same reaction, I'm happy to find out (may confirm my opinion).
Best regards,

Edited April 14, 2019 by BCDS
New tests

[hTiger1 49]

Here are some things I do if my HCL causes problems.

 

Disconnect the power plug from the HCL and wait for 2-3 hours before reinserting it to discharge the electronics.

 

Delete all consumption data described by Fibaro.

 

Take a backup and then restore it.