Wallmote Quad configuration

[jsetsaas 0]

I've been trying to configure my Aotec Wallmote Quad without success.

 

I thought that I could configure the Wallmote to "talk" directly to the lights, so this would work, even though the Fibaro HC2 is not working.

 

Here is the basic configuration

Please login or register to see this image.

/monthly_2019_02/image.png.44e0af5e41eb761ef003dc90ed4af012.png" alt="image.png.44e0af5e41eb761ef003dc90ed4af012.png" />

 

Then I go to associations, where I have defined group 2,4,6 and 8, with M associations, as shown.

 

 

I woke the quad, and from the config, it looks like the associations are set on the device.

 

But selecting any button on the Quad does.... nothing...

I've tried setting only M, only the S and both the M and the S. But... nothing ...

 

Another thing. When trying to set this up, I've from time to time experienced that groups 4, 6 and 8 are suddenly gone from my configuration.

 

I am assuming that I am missing something very basic here. 

 

 

 

 

Any suggestions?

 

 

 

 

[Jackson 1]

Hi, I have the same experience. for as far as I know, these channel associations don't work. I wrote a script to cach the short and long keypresses.

Unfortunately swipe up / swipe down are not functional in this situation. So 'only' 8 button functions instead of 16.

[Brendanlim 0]

On 3/10/2019 at 9:55 PM, Jackson said:

Unfortunately swipe up / swipe down are not functional in this situation

Hi, I just included the Wallmote and I can use all the 16 button function.
HC2 Ver 4.530
WallMote Ver 2.3

 

[Jackson 1]

@Brendanlim Did you do this through associations?

[Brendanlim 0]

On 4/6/2019 at 5:43 PM, Jackson said:

@Brendanlim Did you do this through associations?

Yes for the Swipe actions. Just add Parameter 4 to 3 (1 byte) and it can control the dimmer by sliding or pressing.

For the held and press, just use the scene from the device page.

[Darshan 0]

how can i use swipe action in Fibaro Device, I didnt see changes after parameter added and also give some help to define assoiciated.

[jsetsaas 0]

On 4/6/2019 at 11:43 AM, Jackson said:

@Brendanlim Did you do this through associations?

Yes, that's what I tried. But was not able to make anything work at all.

[Brendanlim 0]

On 4/13/2019 at 10:48 PM, jsetsaas said:

Yes, that's what I tried. But was not able to make anything work at all.

Can you try remove the device and do a full reset on the wall mote, then include again and setting the parameter.

 

On 4/12/2019 at 6:38 PM, Darshan said:

how can i use swipe action in Fibaro Device, I didnt see changes after parameter added and also give some help to define assoiciated.

Have you set the association of the wall mote by setting group 3, 5, 7 and 9 and control the switches by swiping the button.
Swipe action can only control the dim of switches such as Dimmer and Roller Shutter.

[wojtas810 5]

Can you do prt sc?