Problem with scene?

[sulkbooth 1]

I have a scene for my blind, which should go down with a lux value >200. 

Since the latest SW updates, it have not worked. I've tried to delete the scene and created it again, but no luck. 

Anyone else having issues with this?

 

 

Please login or register to see this attachment.

Please login or register to see this attachment.

[hTiger1 50]

I have scenes similar to yours.

I suggest you try the following.

 

Remove both check marks in the top image.

 

In the bottom picture.
Remove weather conditions check mark.
Remove Temperature stue check mark.

 

In the markise close insert approx. 8 seconds in the red box.

I have some scenes that will only run with a slight delay.

Edited May 18, 2019 by hTiger1

[hTiger1 50]

Have you tried that
Clear all historical energy data

[sulkbooth 1]

16 minutes ago, hTiger1 said:

Have you tried that
Clear all historical energy data

No, will try this first . Thanks!

[sulkbooth 1]

Well, tried every suggestion - but still no movement. 

Now its about 300lux and the blind is still in. 

[hTiger1 50]

Does the scene work if you run it manually?

[sulkbooth 1]

14 hours ago, hTiger1 said:

Does the scene work if you run it manually?

No, I set it to "manual" now - and afterwards set in "ON". 

Nothing happened. 

 

I can open close the blind in the app, so it is wired correctly

[sulkbooth 1]

Could it have something to do with "max running instances"? I've never understood that parameter in the scene...

[sulkbooth 1]

Tried to reset the PIR sensor, included it again. changed the battery, built a new scene (simpler). Still no movement

 

 

Please login or register to see this attachment.

Please login or register to see this attachment.

[hTiger1 50]

Nice to try with a simplified scene.
When you run the scene manually, click the arrow below the icon. If that doesn't work, delete all historical energy data.
You can also first try to restart, turn off the power, and wait 15 minutes before turning on again.

Max running instance is not the fault here.

 

[sulkbooth 1]

2 hours ago, hTiger1 said:

Nice to try with a simplified scene.
When you run the scene manually, click the arrow below the icon. If that doesn't work, delete all historical energy data.
You can also first try to restart, turn off the power, and wait 15 minutes before turning on again.

Max running instance is not the fault here.

 

There is something else wrong here - tried to make a scene with motion and then turn on the lights : nothing happens. So might try to clear the whole HCL... 

[Sjakie 156]

Perhaps out of the line.

Blinds closed at >200 that means they are closed when the sun is shinning.

If you want to close by dark try <200 so they will be closed some were around sunset.

Or am I wrong?

[sulkbooth 1]

4 hours ago, sulkbooth said:

There is something else wrong here - tried to make a scene with motion and then turn on the lights : nothing happens. So might try to clear the whole HCL... 

The new motion/light scene works now (suddenly out of nothing), so it might be the roller shutter that’s defect. Tried to include it again and it don’t want to do that. 

[sulkbooth 1]

Well, with a new Roller shutter - no change. 

My scene that the blind at night works  (this is in the living room so I want it to be "rolled in" after sunset). 

But it does not go down by itself. I changed the way now for test - so it should go down when the Lux is below 250. 

 

Still nothing

 

Please login or register to see this attachment.

Please login or register to see this attachment.

Please login or register to see this attachment.

[Curt4U 0]

you have to clear all energydata of each device (maybe socket only is enough)

 

after that it should work for a time, as data history is big again.... and energy data clears again.....

 

 

looks like a bug since 4.4xx or so.....

Edited September 8, 2019 by Curt4U