Communication with raspberry pi as computer

[PostarLakogSna 0]

Hello, 

I am wondering if it is possible to connect CO Fibaro sensor directly to raspberry pi? I would like at least to retrieve some signal and process it.

If there is any other way can you point me to it?

Best regards

[10der 832]

1 hour ago, PostarLakogSna said:

Hello, 

I am wondering if it is possible to connect CO Fibaro sensor directly to raspberry pi? I would like at least to retrieve some signal and process it.

If there is any other way can you point me to it?

Best regards

 

no, HC2 has closed software and peripheral devices architecture - your can't connect to USB any own devices and install and develop any softwares.

so. you should configure on rpi for example nginx or light-http-server/ apache and respond via http responce JSON what can hook Hc2 VD, for example

no direct connections to HC2, only Z-wave devices are supported.

otherwise connect your CO device to

Please login or register to see this link.

Edited November 6, 2019 by 10der

[PostarLakogSna 0]

Hc2 means home center device?

Is it possible to configure sensor that it sends push notification without owning home center device?

[10der 832]

@PostarLakogSna HC2 it's gray box on your table with label "Home Center 2 / Fibaro system"

 

most feature HC2 focused on Z-Wave devices and you can't use some user-friendly features from HC2 with third-party devices.

about pushimg notofication 

 

list devices

Please login or register to see this code.

 

send push notify

 

Please login or register to see this link.

 

where 192.168.1.36 is HC2

 

result example (old iwatch 1st gen)

 

Please login or register to see this image.

[PostarLakogSna 0]

Thanks for answer, but will co sensor send notification if i dont have hc2?

[10der 832]

10 minutes ago, PostarLakogSna said:

Thanks for answer, but will co sensor send notification if i dont have hc2?

STOP!

 

1st you have CO Fibaro sensor 

2nd you hav't HC2

3nd you have RPI

 

yes, you can connect  CO Fibaro sensor to RPI if you have

1)

Please login or register to see this link.

 shiled

2) or any USB Z-wave sticker. ranging from. UBZ / AEOT to any Chines USB servers

3) also you should have open-sources HA for example HASS / OpenHyb etc

 

Edited November 6, 2019 by 10der