Qubino Double Relay status not updating in Fibaro App

[Sovereign 1]

I have a number of Qubino Flush Dimmers and Double Relays connected to Fibaro HCL v4.56. The device status in the HCL app won't update when switching the Qubino device at the light switch. The lights are working from the switch and app. The app updates when switching the light on or off from the app, but the app device status won't update when switching from the light switch. Anyone came across this before? I need a way to get the status to work.

[TestJure 0]

The Fibaro sets the Single Channel Lifeline to the Qubino Flush 2 Relay, you have to set the Multi-channel Lifeline manually. All you have to do is to go in to the advanced settings of the 2 Relay and under Associations / Setting Associations / Group 1 and uncheck the S and check the M, Save all and  you should have the values refreshed.

[Grubsy 0]

On 2/13/2020 at 1:35 AM, TestJure said:

All you have to do is to go in to the advanced settings of the 2 Relay and under Associations / Setting Associations / Group 1 and uncheck the S and check the M, Save all and  you should have the values refreshed.

 

Thank you! I was having the issue with the phsyical switches and Home Center 3 not updating it's status (Home Center 3 Lite v5.080.9). Updated 6 x Flush 2 Relays and looking good so far.

 

Only slight differance was I had to hit the trash can icon on the single channel entry first and then add the multichannel one.

 

Please login or register to see this attachment.