Remember last Colour?

[gummiente72 0]

Hi there,

unlike my other RGBW 1 modules, the updated RGBW 2 does not have a

 

• parameter 71 "Response to BRIGHTNESS set to 0%".

 

In that parameter settings i could activate "last set colour is memorized"

 

With the RGBW 2 module, there is no "parameter 71" any more...?

I also learned that I have to set the RBGW 2 in "HSB-Mode" (parameter 150) and connect my toggle switch to IN3 (instead IN1 at my RGBW 1 module) in order to have the dimming feature available using my toggle switch.

 

Problem remaining:

The toggle switch dimms well, but resets the colour setting first and dimms all channels-so i was looking to find something like the old parameter 71...negative

 

Desired behavior:

1. Toggle switch pressed short: Illuminate the LED stripe in the last intensity and colour (as my othe RGBW 1 modules)?
2. Toggle switch double clicked: Maximize intensity with the last set colour (as my othe RGBW 1 modules)?

 

Realized behhaviour:

1. Toggle switch pressed short: Illumiante the LED stripe in the last intensity but resets the colour to all channels?
2. Toggle switch double clicked: Maximize intensity but resets the colour to all channels?

 

Please help. Thanks

[Rozso2 1]

On 4/28/2020 at 7:43 AM, gummiente72 said:

Hi there,

unlike my other RGBW 1 modules, the updated RGBW 2 does not have a

 

• parameter 71 "Response to BRIGHTNESS set to 0%".

 

In that parameter settings i could activate "last set colour is memorized"

 

With the RGBW 2 module, there is no "parameter 71" any more...?

I also learned that I have to set the RBGW 2 in "HSB-Mode" (parameter 150) and connect my toggle switch to IN3 (instead IN1 at my RGBW 1 module) in order to have the dimming feature available using my toggle switch.

 

Problem remaining:

The toggle switch dimms well, but resets the colour setting first and dimms all channels-so i was looking to find something like the old parameter 71...negative

 

Desired behavior:

1. Toggle switch pressed short: Illuminate the LED stripe in the last intensity and colour (as my othe RGBW 1 modules)?
2. Toggle switch double clicked: Maximize intensity with the last set colour (as my othe RGBW 1 modules)?

 

Realized behhaviour:

1. Toggle switch pressed short: Illumiante the LED stripe in the last intensity but resets the colour to all channels?
2. Toggle switch double clicked: Maximize intensity but resets the colour to all channels?

 

Please help. Thanks

Hi gummiente72!

Have you sold the problem?

I have the same problem.

 

Rozsó