Help With Scene For Blinds

[Guest puma]

Hi I am using a roller shutter 3 and I am trying to get a simple scene working as I only have one momentary switch connected to the RS3.

 

Basically I just want it to check if the blind is up and the switch is pressed put it down and same for if it's down and pressed put it up.

 

I can't seem to get it to work correctly can anyone possibly help out with this code?

 

Please login or register to see this code.

 

Edited October 14, 2020 by puma

[Guest puma]

anyone?

[SmartHomeEddy 1,005]

I think you need some endings

 

Please login or register to see this code.

(I don't have blinds, so I don't know if the "0",  "1, "open" and "close" will work)

[Guest puma]

Thanks for your help.

 

I ended up getting it to work a little better but I have had to split it into two scenes as I can't get it to work together. You were right about the status of the blinds 0 is closed and 99 is open.

 

I would be nice to just have one scene but I am ok with this for now. Also I would like to change it a little so instead of having it only saying if it's 99 then close can I say if it's >70 close? Sometimes I drop some of by blinds a little bit while the sun it hitting the TV and then when it sets drop them all the way.

 

Open

Please login or register to see this code.

 

Close

Please login or register to see this code.