FGS-213 with one pushbutton on S2

[MarceFinns 0]

Hello, i would like to use the S2 input on a single switch (FGS-213) to trigger a scene with a push button.

Is there a way to configure this device with a toggle switch on S1 and a momentary switch on S2?

thank you.

 

[Flix123 1]

On 6/7/2021 at 11:35 AM, MarceFinns said:

Hello, i would like to use the S2 input on a single switch (FGS-213) to trigger a scene with a push button.

Is there a way to configure this device with a toggle switch on S1 and a momentary switch on S2?

thank you.

 

I don't see why not. That should be the normal way to operate it. Just make sure the relevant scene activation parameter is enabled (28,29)

[jakub.jezek 370]

On 6/7/2021 at 11:35 AM, MarceFinns said:

Is there a way to configure this device with a toggle switch on S1 and a momentary switch on S2?

No. Switch settings is only in parameter 20 and you select type of switch for both inputs.

 

You need FGS-214 to achieve what you want.

[tinman 1,070]

one might try this

- set it as momentary switch

- enable local protection (so relais will not get turned on by the switch itself)

- enable hold, release and click

create scene which reads:

- S1 hold / release to turn on / off that switch / relais itself

- S2 1x click to run scene