Cannot seperate inputs from outputs on Smart Implant

[Prokopis Bor 7]

Hello. I'm trying to seperate inputs from outputs on 2 smart implants but the coresponting swithces return to their initial positions. I am using HC3L with to Smart Implants with the latest updates.  I tryied different options for Inputs (ie NO, NC, Monostable etc) but without success. Any idea? Thanks

Please login or register to see this attachment.

[m.roszak 556]

We are working on it.
You can use "Local Protection" switch directly in outputs configuration - it will work the same.

[amarcuvitz 0]

I am using the FGBS-222 on Homeseer HS4.  I too want the inputs separated from the outputs as the manual advertises.  Homeseer HS4 only provide a UI for setting device parameters.  Is there another way to configure the Local Protection Command Class as I have no interface that resembles what you show from HC3L.

[WizzyWik 0]

On 5/6/2022 at 10:47 AM, m.roszak said:

We are working on it.
You can use "Local Protection" switch directly in outputs configuration - it will work the same.

Hi, any solution yet? Switches jump back...

[m.roszak 556]

Fixed in new beta if I remember correctly.

For now use local protection settings directly on outputs - this do the same.

 

On 5/30/2022 at 9:06 PM, amarcuvitz said:

I am using the FGBS-222 on Homeseer HS4.  I too want the inputs separated from the outputs as the manual advertises.  Homeseer HS4 only provide a UI for setting device parameters.  Is there another way to configure the Local Protection Command Class as I have no interface that resembles what you show from HC3L.

Controller needs to support CC Protection to configure this.

[Gila Monster 0]

On 7/26/2022 at 2:00 PM, m.roszak said:

Fixed in new beta if I remember correctly.

For now use local protection settings directly on outputs - this do the same.

 

Controller needs to support CC Protection to configure this.

 

Hi 

Please login or register to see this link.

 

Please login or register to see this link.

!

 

Where exactly to so this "For now use local protection settings directly on outputs", not able to find it!!!!

 

Thanks in advanced.

[m.roszak 556]

You will find Local Protection settings in both outputs configuration (Binary Switches).

[raphal4 0]

Hi

I've manipulate the local protection settings. Now for IN1 is work fine But if I pouch bouton IN2 then I have an action on Out2. What can I do.

 

[Fabir 70]

@raphal4Things you can try:

-Restart the hc3

-Soft reconfiguration  of the Smart Implant

-Exclude / include the Smart Implant again to the hc3 with- or without security.