Kamera Netatmo Presence

[Lukas1976 0]

Czy jest ktoś w stanie mi pomóc dodać Kamerę Netatmo do HC2- nie jestem swoim umysłem ogarnąć ścieżek do Jpeg i Mpeg

[Sankotronic 2,370]

Hello @Lukas1976 ,

 

I will answer in English.

 

1) First step is to install this scene: 

Please login or register to see this attachment.

 

2) Then you will have to setup your credentials for Netatmo in scene code:

Please login or register to see this attachment.

If you don't have yet client_id and client_secret then login to your Netatmo account and go here:

Please login or register to see this link.

  and then Login. After you login click on your login name in upper right corner and select My apps. You will then come to page where you can add your apps and get client id and secret.

 

3) After running scene, it will find all Netatmo cameras and provide their stream link in scene debug window:

Please login or register to see this attachment.

 

In case that you get following result:

Please login or register to see this attachment.

 

Camera does not have local network stream link then you will have to power cycle camera and then run scene again.

 

4) On HC2 now go to devices by clicking on main menu:

Please login or register to see this image.

/monthly_2022_07/643075150_HC2mainmenudevices.png.cd44d12bcd62ca0a1daad13cd1bb7690.png" />

 

5) then on left column:

6) select to add camera:

Please login or register to see this attachment.

7) Now setup camera as on picture below. Setup camera IP address and paste link that you get with scene to JPG path and MJPG stream path and save:

Please login or register to see this spoiler.

You should now see camera on browser home page and also in mobile app.

 

Enjoy coding!

 

[Sankotronic 2,370]

Hi @Lukas1976 ,

 

I forget to mention that it is recommended to set camera IP to static. The best way to do that is to bind camera MAC address to IP address in your router. How to do that you can find in your router manual.

[Lukas1976 0]

SUPER !!!

[ntg 0]

Hello,

Should this, very good, instruction still work with Home Center 2 and Netatmo Presence?

I think, I'm stricktly following this manual and only result I got is the message:

Please login or register to see this image.

/monthly_2024_12/image.png.96d57dc603fbd71e7ff6556e2d2bd1c5.png" />

 

Cameras are set to static IP, app on dev.netatmo.com is created (few resets done), even Netatmo password was changed.

[Sankotronic 2,370]

Hello @ntg ,

 

Thanks for asking about this scene and reminding me that it needs an update. This scene can't find any cameras anymore because Netatmo changed API authorisation.

When I return home in a week time I can publish updated version of this scene that will work.

[ntg 0]

Hello 

Please login or register to see this link.

,

It's very good information, Thanks.

Edited January 17, 2025 by ntg

[ntg 0]

Hello 

Please login or register to see this link.

,have you found time to update this scene?

[Sankotronic 2,370]

2 hours ago, ntg said:

Hello 

Please login or register to see this link.

,have you found time to update this scene?

 

Hi @ntg ,

 

Yes, but then I checked Netatmo developer site and find out that they depreciated endpoint to get cameras at one go without needing first to check home ID. The old endpoint still works, but it is just matter of time when they will remove it. Anyway from simple code modification, now I have to rewrite it entirely, not only for this scene, but also for other related VD's and scenes.

 

I do have solution that works for HC2, but it is part of the UHAS for HC2. I really do not have enough time to work for HC2 anymore because I'm in the rush to make solution for HC3 as soon as possible and definitely before my HC2 give up.

[ntg 0]

OK, I understand.