Walli Roller Shutter with L, N and S cables

[PatrickvB1800 0]

Hello all,

 

I have an interesting wiring situation, my current roller switch (double switch) has Line, Neutral and (I think) 1 Switch wire.

These 3 wires all go into the double switch+ an extra wire which bridges 2 of the connectors.

When I connect the Line and Neutral the Walli Roller Shutter works so the colours of the cables match, but I'm left with only 1 Switch wire.

Does anybody know how to resolve this wiring headache?

Please login or register to see this attachment.

Edited October 7, 2022 by PatrickvB1800

[Martin_N 146]

@PatrickvB1800

Your question makes no sense. Do you have a Walli version of RollerShutter?
Or the RollerShutterX module and this switch from the photo?
There is no photo or diagram of your wiring.
In addition, it is excluded that the Neutral wire passes through the switch you have in the photo. This would mean that if it is switched on, the circuit will go into a short circuit and you will blow the fuses.
If you have a Walli Roller, it needs a Neutral conductor for its function.

How much lead do you have in the box?

[tinman 1,028]

20 hours ago, PatrickvB1800 said:

Does anybody know how to resolve this wiring headache?

 

sure, i know, and

Please login or register to see this link.

how to get that solved.