Aeotec LED Bulb 6 Multi-White

[Håkan Enhager 6]

Hi,

I have two Aeotec LED Bulb 6 Multi-White which previously was connected to my HC2.  When they were connected to my HC2 they were working perfect, and I could adjust the colors as I liked. 

 

I have made a clean installation of HC3 and added the devices successfully (excluded them properly from the old HC2).  BUT it is not possible to adjust the color now when connected to HC3, only the temperature of the white light is possible to adjust. 

I have all color sliders, but nothing happens when I adjust the color. 

I have tried to to re-configure the devices but without resolving my problem. 

 

Any idea from anyone on what might be the issue?

[Neo Andersson 174]

It has to have a linked device, where you can access the colors.

Please login or register to see this attachment.

[Håkan Enhager 6]

Hi, thanks for the reply. It looks like I have both.  It is only the WHITE device that works. 

the COLOR device I can of course adjust all color levels, switch on/off, but nothing happens with regards of colors. Sometimes the Warmth of the white light changes based on what I do.  But again, nothing with the colors works as expected. 

 

I have tried to reconfigure the devices.  Did not help. 

I have two bulbs with same issue.  They worked well on my HC2. 

 

Please login or register to see this attachment.

Edited November 21, 2022 by Håkan Enhager

[Neo Andersson 174]

4 hours ago, Håkan Enhager said:

Hi, thanks for the reply. It looks like I have both.  It is only the WHITE device that works. 

the COLOR device I can of course adjust all color levels, switch on/off, but nothing happens with regards of colors. Sometimes the Warmth of the white light changes based on what I do.  But again, nothing with the colors works as expected. 

 

I have tried to reconfigure the devices.  Did not help. 

I have two bulbs with same issue.  They worked well on my HC2. 

 

Please login or register to see this attachment.

Try to click on Favorite colors, and check if it works.

[Håkan Enhager 6]

Hi,

 

I have tried that, it does not help to press the favourite colors.  Nothing really happens. 

 

Håkan

[Neo Andersson 174]

2 hours ago, Håkan Enhager said:

Hi,

 

I have tried that, it does not help to press the favourite colors.  Nothing really happens. 

 

Håkan

I have no clue then...maybe try to contact support directly..they will fix this for sure.

[Håkan Enhager 6]

Thank you, I have now sent a message to the Fibaro support.  Hope for quick answer. 

[Håkan Enhager 6]

I noticed under Parameters, that there are no parameters.  Anyone who has the bulb that can check if you have the parameters available there, and in case, if possible for you to download and share the template? 

Please login or register to see this attachment.