FGD 212 with different family components

[Katulo 0]

Hi community, 

 

I am experimenting that when adding a FGD 212 component, I see different families, when, I thought they should be the same:

 

Please login or register to see this attachment.

 

I am showing in the picture all devices, and the difference is that one FGD212 has two energy meters, and the other no, and there are 3 "lights" in one, and not in the other... 

 

Thank you. 

Regards, 

Enrique 

[Fabir 67]

@KatuloHi in my case the FGD-212 Fibaro dimmer2 module looks like below

 

Do you use ZW Engine 3 on your hc3? It is known for its strange behavior.

 

 

Please login or register to see this attachment.

Edited February 7, 2023 by Fabir

[Katulo 0]

On 2/7/2023 at 8:10 PM, Fabir said:

@KatuloHi in my case the FGD-212 Fibaro dimmer2 module looks like below

 

Do you use ZW Engine 3 on your hc3? It is known for its strange behavior.

 

 

Please login or register to see this attachment.

thanks @Fabir@Fabir I think you are seeing only the non hidden components. I you use filters and add Hidden components, or "all" components, you'll see all of them. I finally solved the issue; I just reset and include the FGD-212, and again, and again.... until I got all the components added. 

 

Regards, 

Enrique

 

To reset:

 

Please login or register to see this image.

/monthly_2023_02/image.png.1356f4cfce96478d5d798dbae609804d.png" />

 

It should look like this:

 

[Fabir 67]

@KatuloI've exluded / included my dimmer2 again. Switched on all the hidden devices in the filter. Still it doesn't look the same as yours. But that's OK, it is dooing what it should.

 

 

 

 

Please login or register to see this attachment.

[Katulo 0]

Ok. Maybe because this model you are using doesn't have this heat detector that mine have. Any case if it is working, perfect.