Aeotec Multisensor 6, still not working fully with Update 5.140 on HC3L

[Fabir 64]

In the system Update 5.140 Release Notes it says:

Z-Wave
   ......
    Support for different revisions of the Aeotec Multisensor 6.

I have tried it on hc3l. It is still not working fully. It's the same as with the previous releases.

After starting the homecenter, the motion sensor is only working once and than stays in breached mode. I'm using it with a power supply

The other senors, seems to working OK.

I've tried with and without security inclusion of the the aeotec multisensor.

 

When I connect the multisensor 6 back to hc2, it is working fine. It has the latest firmware from Aeotec.com

[Molla 0]

Hi, exact the same problem here! How can we solve this?

[Fabir 64]

@MollaHello and welcome to the community.

 

In my case it helped to set paramater 5 to 2, on the aeotec multisensor 6

 

2 - Send Sensor Binary Report CC

 

2 - Send Sensor Binary Report CC

 

 

2 - Send Sensor Binary Report CC

2 - Send Sensor Binary Report CC

[Molla 0]

 

Hi, thanks for your quick response. I have motion sensor 7.
Which ID/Type should the parameter be changed?

 

I finally managed to add it, only everything is marked with a "yellow triangle" or not configured.
I manually updated the Sensor 7 to 1.4.2. Unfortunately, it won't help.

 

 

Last year I was able to easily add 5 sensors with the older version of Fibaro. And now it doesn't work...

 

Please login or register to see this image.

/monthly_2023_03/image.png.08201cfa40a5ac29d8bc4d03dc3d7abc.png" />

[Fabir 64]

@MollaIf it says not configured, you can't use it.

 

I also have an aeotec multisensor 7 on firmware 5.140. It is working OK, but has no template. I've reported that already to the Fibaro Support.

 

My multisensor 7 is also on FW1.4. I did not change any parameters. 

 

But I had to include it to the homecenter without security, in order to have it working. I use zwave engine ZW2.

 

 

[Nenzo 0]

Same for me, multiple Multisensor v6 but they work only once and then stop working. 

[Fabir 64]

@Nenzo Hello and welcome to the community.

 

Do you mean the motion sensor?

 

Did you set parameter 5 to 2?